Allied-telesis AT-S63 Manual do Utilizador descarregar pdf (Página 181)

100

101

AT-S63 Management Software Command Line Interface User’s Guide

Section I: Basic Operations 181

DELETE LACP PORT

Syntax

delete lacp aggregator=

name

port=

port

Parameters

aggregator Specifies the name of the aggregator. The name is

case-sensitive.

port Specifies the port to delete from an aggregator. You can

delete more than one port at a time. You can specify the

ports individually (for example, 5,7,22), as a range (for

example, 18-20), or both (for example, 1,14-16).

Description

This command removes a port from an aggregator. You must identify the

aggregator by its name. To display the names of the aggregators on the

switch, refer to “SHOW LACP” on page 189. To completely remove an

aggregator, see “DESTROY LACP AGGREGATOR” on page 182.

Caution

Disconnect the network cable from a port before removing it from an

aggregator. Removing a port without first disconnecting the cable

can result in loops in your network topology, which can result in

broadcast storms and poor network performance.

Example

The following command removes port 9 from the “lacp_server” aggregator:

delete lacp aggregator=lacp_server port=9

1 2 ... 176 177 178 179 180 181 182 183 184 185 186 ... 679 680

Comentários a estes Manuais

Sem comentários

Allied-telesis AT-S63 Manual do Utilizador Página 181

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware de computador Allied-telesis AT-S63