Allied-telesis AT-CV1000 Manual do Utilizador descarregar pdf (Página 26)

Chapter 3: Installation

Mounting the AT-CV1000 Chassis on a Wall

The AT-CV1000 chassis is shipped with two wall-mounting brackets. The

chassis is designed to be mounted vertically on a wall using the keyholes

on the wall-mounted brackets.

To mount the AT-CV1000 chassis on a wall, perform the following

procedure:

1. If attached, remove the rubber feet, data cables, and power cord from

the chassis.

2. Install the line card according to the instructions in “Installing a

Converteon™ Line Card” on page 32.

3. Install the provided wall-mount brackets onto the chassis, as illustrated

in Figure 8.

Figure 8. Installing the Wall-Mount Brackets on the Chassis

4. Select a wall location for the device.

5. Place the chassis against the wall and mark the locations for the wall

anchors.

AT-CM202

LK A

LK AT FD

AT-CV1000

SML ML OAM

263

Caution: The attached mounting brackets must be used to

securely mount the device on the wall.



E15

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 41 42

Sem comentários

Allied-telesis AT-CV1000 Manual do Utilizador Página 26