Allied-telesis AT-MC605 Manual do Utilizador descarregar pdf (Página 18)

Overview

AT-MC605 Port Descriptions

VDSL Line Port The VDSL Line port features an RJ-11 connector. It allows you to connect

two AT-MC605 VDSL Ethernet Extender units together using existing

internal building telephone copper pairs. By using this equipment, both

ethernet data and analog phone service are made accessible within a

building without installing additional wiring for the ethernet connections.

One AT-MC605 Ethernet Extender is configured as a Provider unit and the

other as a Subscriber unit. The two units need to be within 3,000 meters

(9842 feet) of each other in order for the port to operate properly.

Table 2 lists the RJ-11 VDSL Line Port pinouts and their assignments.

Phone Port The Phone Port which allows you to connect one AT-MC605 Ethernet

Extender configured as a Subscriber unit to a telephone and a second AT-

MC605 Ethernet Extender configured as a Provider unit to your private

telephone equipment in the building equipment room. This port features

an RJ-11 connector.

Table 3 lists the RJ-11 Phone Port pinouts and their assignments.

Table 2. RJ-11 VDSL Line Port Pinouts

Pin Assignment

1N/C

2N/C

3 VDSL and phone ring

4 VDSL and phone tip

5N/C

6N/C1

Table 3. RJ-11 Phone Port Pinouts

Pin Assignment

1N/C

2N/C

3 phone ring

4 phone tip

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 47 48

Sem comentários

Allied-telesis AT-MC605 Manual do Utilizador Página 18