Allied-telesis AT-MCR1 Manual do Utilizador descarregar pdf (Página 29)

AT-MCR1 Media Converter Chassis Installation Guide

Mounting the Chassis on the Wall

The chassis can be mounted vertically on a wall using the

mounting brackets that come with the unit.

To mount an AT-MCR1 chassis on the wall, perform the following

procedure:

1. If attached, remove the rubber feet and power cord from the

chassis.

2. Select a wall location for the chassis and mark two hole

locations for the wall-mounting screws or plastic wall anchors

(for wall-mounting onto a concrete wall).

Note

Make sure that the location provides easy access for

installing the twisted pair, fiber optic, and power cables to and

from the chassis.

Note

If the AT-MCR1 is to be mounted onto a concrete wall, make

sure to drill the required holes with the drill bit using the drill

bit size that is suitable for the plastic wall anchors. Then,

insert the plastic wall anchors.

Caution

The attached mounting brackets must be used to securely

mount the chassis onto the wall.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 45 46

Sem comentários

Allied-telesis AT-MCR1 Manual do Utilizador Página 29