Allied-telesis AT-S31 Manual do Utilizador descarregar pdf (Página 22)

Getting Started

Table 1 lists the menu options.

Table 1 Omega Main Menu Selections

Menu Selection Page Function

Module Status and

Configuration

38, 39 Displays the status of the modules and ports. Also

used to assign names to the modules and configure

the port settings.

Administration

Update software in

another system

55 Downloads the AT-S31 software from one

management module to another management

module.

Broadcast updated

software to all systems

56 Downloads the AT-S31 software from one

management module to all management modules

on the network.

XModem software

updated to this system

53 Downloads the AT-S31 software to the

management module using XModem. This option is

only available through a local session.

Connect to a remote

system

35 Enables you to connect to and manage another

PowerBlade PBC18 while running a local

management session on a chassis.

Ping a remote system 32 Tests the connectivity to a network end-node.

Activity monitor 31 Displays a screen listing the activity for the chassis.

Diagnostics 29 Performs a series of diagnostic tests on the chassis.

Reset and restart the

system

33 Resets the management module.

System Configuration

Omega options 46, 48, 49 Configures the Omega security features, such as,

the Omega password and the timeout value.

IP parameters 24 Configures the IP parameters for the chassis, such as

the IP address, subnet mask, and gateway address.

Also used to specify the IP addresses of up to four

network management stations to receive traps from

the chassis.

Terminal configuration 34 Adjusts the settings for the RS-232 port.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 63 64

Comentários a estes Manuais

Sem comentários

Allied-telesis AT-S31 Manual do Utilizador Página 22

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware de computador Allied-telesis AT-S31