Allied-telesis AT-S68 Manual do Utilizador descarregar pdf (Página 42)

Port Mirroring

5. Depending on your selection in Step 4, a screen similar to Figure 16

will be displayed.

Figure 16 Source Port TX/RX Configure (RX Data) Menu

6. Type 1 to select Mirror Filter. The following prompt is displayed:

Enter new filter (A-All Frames, D-Dest Addr,

S-Source Addr):

7. Type your selection and press <Enter>.

8. Type 2 to select Mirror MAC Address. The following prompt is

displayed:

Mirror Frames with MAC Address =

9. Enter the MAC address and press <Enter>.

10.Type 3 to select Mirror Divider.

Note

If you selected Mirror All Frames under Mirror Filter, you do not

need to change this parameter.

The following prompt is displayed:

Select Divider value (2-1023, 1 to Disable) ->

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 89 90

Sem comentários

Allied-telesis AT-S68 Manual do Utilizador Página 42