Allied-telesis AT-S88 Manual do Utilizador Página 153

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 158
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 152
AT-S88 Management Software User’s Guide
145
None - No packet filtering takes place for this MAC address.
Destination - Packets are filtered when this MAC address appears in
the packets as the destination address.
7. Click Add.
8. Do one of the following:
Click OK to save the changes.
Click Reload to clear the changes and start over.
9. To permanently save these settings in the configuration file, from the
main menu, select Save Configuration.
The Save Configuration page is shown in Figure 3 on page 13.
10. Click Save.
Modifying a
Static MAC
Address
To modify a static MAC address, perform the following procedure:
1. From the main menu, select Bridge > Static Addresses.
The Static Addresses page is shown in Figure 46 on page 140.
2. Click First, Previous, Next, or Last to move through the list of MAC
addresses to highlight the one you want to modify.
3. Modify the settings for the selected MAC address.
4. Click Modify.
5. Do one of the following:
Click OK to save the changes.
Click Reload to clear the changes and start over.
6. To permanently save these settings in the configuration file, from the
main menu, select Save Configuration.
The Save Configuration page is shown in Figure 3 on page 13.
7. Click Save.
Removing a
Static MAC
Address
To remove a static MAC address, perform the following procedure:
1. From the main menu, select Bridge > Static Addresses.
The Static Addresses page is shown in Figure 46 on page 140.
Vista de página 152

Comentários a estes Manuais

Sem comentários