Allied-telesis AT-WA7501 Manual do Utilizador descarregar pdf (Página 100)

Chapter 4: Configuring the Radios

100

Node Type Configure the 802.11g radio to master, station, or

disabled:

Master: The radio always operates in Master

mode. The radio becomes active to accept

connections for wireless devices when the

access point joins the spanning tree. All service

sets to be configured for a VLAN must be set to

Master.

Station: The radio always operates in Station

mode. The radio searches for an access point

with an active Master mode radio to connect to. If

a connection is established, this link becomes a

possible connection to the root.

Disabled: The radio is disabled.

You can create up to four service sets for this

radio by setting the Node Type as follows:

 If the primary service set is Master, up to

three secondary SSIDs may be set to Master.

 If the primary SSID is Station, all secondary

service sets are disabled and do not appear

on screen.

 If the primary service set is Disabled, all

secondary service sets (and the physical

radio) are disabled.

SSID

(Network Name)

Enter a unique SSID for each enabled service

set. You can configure up to four service sets for

this radio. The SSID is case sensitive and cannot

be more than 32 alphanumeric characters.

802.11g radios can be configured to

communicate with other 802.11g and/or 802.11b

radios with the same SSIDs.

You need to assign the same SSID to the

wireless end devices that will connect to the

radio.

Member Limit Controls the maximum number of devices that

can be associated with this enabled service set.

Table 29. 802.11g Radio Parameter Descriptions (Continued)

Parameter Explanation

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 338 339

Sem comentários

Allied-telesis AT-WA7501 Manual do Utilizador Página 100