Allied-telesis AlliedView-EMS 3.11 DEVICE MANAGEMENT Manual do Utilizador descarregar pdf (Página 225)

100

101

AlliedView™-EMS 3.11 Device Management Guide Page 225 of 402

Port Menu

From the Port menu, you can view and edit MIB information about selected ports.

Utilization

Displays the port's utilization information.

Interface Info

Displays port statistics such as the number of frames received and transmitted on

the port, bytes received and transmitted on the port, and port status. This table also

displays high-capacity port statistics including received and transmitted

unicast/multicast/broadcast packets on the port, link up/down trap and port speed.

Note - The current firmware version returns a 'noSuchName' value for the Port

Alias and Counter Discontinuity Time parameters.

Detail Info

Duplex Mode

Displays the duplex mode of the ports.

Bandwith Limits

Displays bandwidth limits of the switch ports.

Error Statistics

Displays error statistics.

Note - The following parameters are not applicable to the AT-x900-48 series and

should be ignored:

 Ethernet Chip Set

 Symbol Errors

 Duplex Status

Spanning Tree Info

Displays the port's spanning tree parameters.

MAU Info

Displays interface-related MAU information for the port.

Note - The MAU Type List Bits and HC False Carriers parameters are not applicable

to the AT-x900-48 series and should be ignored.

Note - The MAU Status and Default MAU Type parameters are implemented as

'read-only'.

MAU Negotiation Info

Displays the MAU's auto-negotiation settings and its status.

1 2 ... 220 221 222 223 224 225 226 227 228 229 230 ... 401 402

Comentários a estes Manuais

Sem comentários

Allied-telesis AlliedView-EMS 3.11 DEVICE MANAGEMENT Manual do Utilizador Página 225

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware de computador Allied-telesis AlliedView-EMS 3.11 DEVICE MANAGEMENT