Allied-telesis AT-GS2002/SP Manual do Utilizador descarregar pdf (Página 44)

Chapter 2: Installation

3. Plug the AC/DC adapter to a power outlet, as shown in Figure 12.

Refer to Appendix A, “Technical Specifications” on page 49 for power

requirements.

Figure 12. Plugging an AC/DC Adapter to a Power Outlet

Warning

The power cord is used as a disconnection device. To de-energize

equipment, disconnect the power cord.  5

4. Verify that the PWR LED on the front of the converter is green. If the

LED is OFF, refer to “Troubleshooting” on page 45 for instructions.

5. Verify that the LINK LEDs for both the SFP port and the twisted-pair

port are green. If either LED is OFF, refer to “Troubleshooting” on

page 45 for instructions.

The chassis is now ready for network operations.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 50 51 52

Sem comentários

Allied-telesis AT-GS2002/SP Manual do Utilizador Página 44