Allied-telesis AT-iMG6x6MOD Electronics Unit Manual do Utilizador descarregar pdf (Página 26)

AT-iMG646MOD Installation Guide

26 Chapter 4: Installing the Gateway Indoors

Connecting the Fiber Optic Cable (BD and EPON)

To connect the fiber optic cable, perform the following procedure:

1. Remove the dust plug from the fiber optic port on the gateway and clean the port and connector. (See

Appendix B, “Cleaning Fiber Optic Connectors” on page 39 for information.)

2. Connect the pigtail cable to the fiber optic port on the gateway, as shown in Figure 19

Figure 19. Connecting the Fiber Optic Cable

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 45 46

Sem comentários

Allied-telesis AT-iMG6x6MOD Electronics Unit Manual do Utilizador Página 26