Allied-telesis AT-S39 Manual do Utilizador descarregar pdf (Página 43)

AT-S39 Command Line Interface User’s Guide

SET SWITCH STACKMODE

Syntax

set switch stackmode=master|slave|unavailable

Parameter

stackmode Specifies the enhanced stacking mode of the switch.

Possible settings are:

master Specifies the switch’s stacking

mode as master. A master switch

must be assigned an IP address and

subnet mask.

slave Specifies the switch’s stacking

mode as slave. A slave does not

need an IP address. This is the

default setting for a switch.

unavailable Specifies the switch’s stacking

mode as unavailable. A switch with

this status cannot be managed from

an enhanced stack. It can be

managed locally through its RS232

Terminal Port or remotely if it is

assigned an IP address and subnet

mask.

Description

This command sets a switch’s enhanced stacking status.

Example

The following command sets the switch’s stacking status to master:

set switch stackmode=master

Note

To determine the master or slave status of your switch, use the

SHOW SWITCH command.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 196 197

Sem comentários

Allied-telesis AT-S39 Manual do Utilizador Página 43