Allied-telesis AT-S62 Manual do Utilizador descarregar pdf (Página 99)

100

101

AT-S62 Management Software Menus Interface User’s Guide

Section I: Basic Operations 99

The menu options are described below:

1 - Add Attributes to Community

If a community string has a closed access mode, you can use this

selection to add new IP addresses of management workstations that can

use the string. You can also use this option to add IP addresses of new

trap receivers. To use this option, do the following:

1. From the Modify SNMP Community menu, type 1 to select Add

Attributes to Community. The following prompt is displayed:

Enter SNMP Community Name:

2. Enter the community string you want to modify. Community strings are

case sensitive. This prompt is displayed:

Enter SNMP Manager IP Addr:

3. If you are modifying a community string with a closed access mode and

you want to add an IP address of a management workstation to it, enter

the workstation’s IP address at the prompt. Otherwise, just press

Return. A community string can have a maximum of eight IP addresses,

but you can add only one at a time with this procedure. This prompt is

displayed:

Enter Trap Receiver IP Addr:

4. If you want the switch to send traps to a trap receiver, enter the IP

address of the receiver at this prompt. Otherwise, just press Return.

The community string is modified and the Modify SNMP Configuration

menu is displayed again.

5. Repeat this procedure to modify other community strings.

6. After making changes, type R until you return to the Main Menu. Then

type S to select Save Configuration Changes.

2 - Delete Attributes from Community

Use this option to delete an IP address of a management workstation or a

trap receiver from a community string. To use this option, do the following:

1. From the Modify SNMP Community menu, type 2 to select Delete

Attributes from Community. The following prompt is displayed:

Enter SNMP Community Name:

2. Enter the community string you want to modify. Community strings are

case sensitive. This prompt is displayed:

Enter SNMP Manager IP Addr:

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 821 822

Comentários a estes Manuais

Sem comentários

Allied-telesis AT-S62 Manual do Utilizador Página 99

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware de computador Allied-telesis AT-S62