Allied-telesis Rapier 48w Switch Manual do Utilizador descarregar pdf (Página 9)

Rapier 48w Switch

Rack-mount the switch

1. Ensure the rack has sufficient space for the switch and its cables. For the

switch’s requirements, see “Selecting a Site” on page 6.

2. Install cage nuts, if required, so they are ready for the rack-mount screws in

the following steps. The Rapier 48w can be front, center, or rear mounted.

3. Unpack the switch.

4. Screw one bracket to each side of the switch using the M4 screws provided.

5. Mount the switch into the rack, and tighten the 4 rack-mount screws.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 45 46

Sem comentários

Allied-telesis Rapier 48w Switch Manual do Utilizador Página 9