Allied-telesis x600-48Ts/XP Manual do Utilizador descarregar pdf (Página 41)

x600 Series Layer 3 Gigabit Ethernet Switches Installation Guide

AT-StackXG Modules, Cables, and Connections

The stacks are connected via the stacking ports on the VCS Stacking

Modules (AT-StackXG), which are installed in the back of each switch.

The following cables are used to connect the stacking ports of x600 series

switches:

 High Speed Stacking Cables (0.5 meter) - StackXG/0.5

 High Speed Stacking Cables (1.0 meter) - StackXG/1

This configuration, shown in Figure 15,

uses two switches that are

connected back to back via two high-speed stacking links. Note that

stacking ports labeled 1 must connect to stacking ports labeled 2. In this

configuration the stack can still function using only a single high speed

link.

Figure 15. Back-to-Back Topology (x600 Switches)

RPS INPUT

100-240VAC~

AT-StackXG

RPS INPUT

100-240VAC~

AT-StackXG

STACK PORT 1

STACK PORT 2

High Speed Stacking Cables (0.5 meter)

Model Number AT-StackXG/0.5

STACK PORT 1 STACK PORT 2

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 93 94

Sem comentários

Allied-telesis x600-48Ts/XP Manual do Utilizador Página 41