Allied Telesis AT-FH705E Guia de Instalação Página 18

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 51
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 17
4
The ports are IEEE802.3u Auto-Negotiation
compliant. This means that the ports can
automatically configure their speed and duplex
mode to match the capabilities of the end nodes
connected to the ports.
Port 5 and the Uplink Port
Port 5 and the Uplink port allow you to connect
an additional workstation to the hub or
interconnect the switching hub with another
switch or hub, without the use of a cross-over
cable. If you need to connect an additional
workstation to the device, use Port 5, which is
configured as MDI-X, just like ports 1 through
4. If you need to connect the device to a switch
or another hub, use the Uplink port, which is
configured as MDI.
Both Port 5 and the Uplink port offer 10 Mbps
or 100 Mbps performance and auto-negotiation
operation for both speed and duplex mode, just
like ports 1 through 4. Both ports feature an
RJ-45 connector and have a maximum
operating distance of 100 meters (328 feet)
using category 5 cable.
Note
You can use either port 5 or the Uplink
port. You cannot use both
simultaneously.
Vista de página 17
1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 50 51

Comentários a estes Manuais

Sem comentários