Allied Telesis AT-iMG634 - R2 Guia do Utilizador descarregar pdf (Página 735)

Classifier command reference QOS

7-39

iMG/RG Software Reference Manual (Quality of Service)

Example --> classifier profile pr1 set rule r1 tos 0x04

See also CLASSIFIER LIST PROFILES

CLASSIFIER PROFILE LIST RULES

CLASSIFIER PROFILE SET RULE DSCP

7.1.5.1.26 CLASSIFIER PROFILE SET RULE TRAFFICTYPE

Syntax CLASSIFIER PROFILE <name> SET RULE <rule_name> TRAFFICTYPE

<type>

Description The purpose of this command is to match the rule based on the traffic type specified in

the ethernet header.

Options The following table gives the range of values for each option that can be specified with

this command and a default value for each option (if applicable).

Example --> classifier profile TestProfile set rule TestRule traffictype 0x800

See also CLASSIFIER LIST PROFILES

CLASSIFIER PROFILE LIST RULES

rule name

An existing rule. To display rule names, use the

CLASSI-

FIER PROFILE LIST RULES

command.

N/A

rule number

An existing rule. To display rule numbers, use the

CLAS-

SIFIER PROFILE LIST RULES

command.

N/A

tos

The

Type of Service, specified as a hexadecimal (0xNN)

in the range 0x00 and 0xfc. The 2 least significant bits are

ignored. Set to ‘any’ to cancel the ToS setting.

any

Option Description Default Value

name The name of the profile in which to alter the rule N/A

rule name The name of the rule in the profile to alter N/A

type The value of the traffic type on which to match the rule. N/A

Option Description Default Value

1 2 ... 730 731 732 733 734 735 736 737 738 739 740 ... 997 998

Comentários a estes Manuais

Sem comentários