Allied Telesis Patch 86261-04 Manual do Utilizador descarregar pdf (Página 11)

Patch 86261-07 For Rapier and AT-8800 Series Switches DELETE IGMPSNOOPING ROUTERADDRESS 11

Patch 86261-07 for Software Release 2.6.1

C613-10388-00 REV G

This command adds reserved IP multicast addresses to the list of router

multicast addresses. The IP address specified must be within the range

224.0.0.1 to 224.0.0.255. This command is only valid if the IGMP snooping

router mode is set to IP with the SET IGMPSNOOPING ROUTERMODE

command.

SET IGMPSNOOPING ROUTERMODE

Syntax SET IGMPSNOOPING ROUTERMODE=

{ALL|DEFAULT|IP|MULTICASTROUTER|NONE}

Description This command sets the mode of operation for IGMP Snooping.

If ALL is specified, all reserved multicast addresses (i.e. 2240.0.1 to

224.0.0.255) are treated as router multicast addresses.

If DEFAULT is specified, the following addresses are treated as router

multicast addresses:

• IGMP Query: 224.0.0.1

• All routers on this subnet: 224.0.0.2

• DVMRP Routers: 224.0.0.4

• OSPFIGP all routers: 224.0.0.5

• OSPFIGP designated routers: 224.0.0.6

• RIP2 routers: 224.0.0.9

• All PIM routers: 224.0.0.13

• All CBT routers: 224.0.0.15

If IP is specified, addresses that are treated as router multicast addresses are

specified with the ADD/DELETE IGMPSNOOPING ROUTERADDRESS

command. In this mode, the switch will retain previous addresses that have

already been specified.

If MULTICAST is specified, the following addresses are treated as router

multicast addresses:

• DVMRP Routers: 224.0.0.4

• All PIM routers: 224.0.0.13

If NONE is specified, no router ports are created.

DELETE IGMPSNOOPING ROUTERADDRESS

Syntax DELETE IGMPSNOOPING ROUTERADDRESS=ipaddr[,...]

where

• ipaddr is a reserved IP multicast address in dotted decimal notation.

Description This command deletes reserved IP multicast addresses from the list of router

multicast addresses. The IP address specified must be within the range

224.0.0.1 to 224.0.0.255. This command is only valid if the IGMP snooping

router mode is set to IP with the SET IGMPSNOOPING ROUTERMODE

command.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 33 34

Sem comentários

Allied Telesis Patch 86261-04 Manual do Utilizador Página 11