Allied Telesis AR450S Guia do Utilizador descarregar pdf (Página 27)

Getting Started with the Graphical User Interface (GUI) 27

Software Release 2.5.2

C613-02034-00 REV A

Figure 2: Connecting a PC directly to the router.

2. Enable IP, using the command:

ENABLE IP

3. Assign the vlan1 interface an IP address in the same subnet as the PC, using

the command:

ADD IP INTERFACE=vlan1 IP=ipaddress MASK=mask

To access the GUI from a PC in your LAN, in the same subnet as the router

(Figure 3 on page 27):

1. Plug the router in and access its command line interface.

Use a patch cable to connect any one of the router’s switch ports to a device

on your LAN (for example, a hub, router or switch).

Access the CLI from a PC that is connected to this device, as described in

“Connecting a Terminal or PC” on page 14.

Figure 3: Connecting your LAN to the router.

2. Enable IP, using the command:

ENABLE IP

Hub or

switch

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 118 119

Sem comentários

Allied Telesis AR450S Guia do Utilizador Página 27