Allied-telesis AT-3726 Manual do Utilizador descarregar pdf (Página 25)

AT-3714F and AT-3726 Installation Guide

2-7

Setting Up

Terminal for

Local

Management

Using Omega

1. For local management, connect your terminal to the RS232 connector

on the switch’s front panel. Use an RS232 DB9 straight-through cable.

Note

The RS232 is for Setup and Diagnostics only. The cable must be dis-

connected during normal operation to maintain Emissions Compli-

ance.

2. Access your terminal emulator program. Press Return several times

to ensure baud configuration (autobaud).

3. Set your terminal to the following

— 8, data bits

— 1, stop bits

— None, parity

See also Table 2-2, Switch Default Settings.

You are now ready to access the switch’s management software,

Omega.

For remote management and further details concerning the Omega

management software, refer to the “AT-S20 User’s Guide” located at

www.alliedtelesyn.com/manuals.htm.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 59 60

Sem comentários

Allied-telesis AT-3726 Manual do Utilizador Página 25