Allied-telesis AT-8550 Manual do Utilizador descarregar pdf (Página 21)

AT-9108, AT-8518, AT-8525, and AT-8550 User’s Command Guide

IP Route Commands

Command Description

config iproute add <ipaddress> <mask>

Adds a static address to the routing table. Use a value of

255.255.255.255 for mask to indicate a host entry

config iproute add blackhole <ipaddress>

<mask>

Adds a blackhole address to the routing table. All traffic destined

for the configured IP address is dropped, and no Internet Control

Message Protocol (ICMP) message is generated.

config iproute add default <gateway>

{<metric>}

Adds a default gateway to the routing table. A default gateway must

be located on a configured IP interface. If no metric is specified, the

default metric of 1 is used.

config iproute delete <ipaddress> <mask>

Deletes a static address from the routing table.

config iproute delete blackhole <ipaddress>

<mask>

Deletes a blackhole address from the routing table.

config iproute delete default <gateway> Deletes a default gateway from the routing table.

config iproute priority [rip | bootp | icmp |

static | ospf-intra | ospf-inter | ospf-as-external

| ospf-extern1 | ospf-extern2 ] <priority>

Changes the priority for all routes from a particular route origin.

disable iproute sharing Disables load sharing for multiple routes.

enable iproute sharing Enables load sharing if multiple routes to the same destination are

available. Only paths with the same lowest cost are shared. The

default setting is enabled.

show ipqos {<ip_destination_address>

<mask>}

Displays the IP QoS table.

show iproute {priority | vlan <name> |

permanent | <ipaddress> <mask>}

Displays the contents of the IP routing table.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 35 36

Sem comentários

Allied-telesis AT-8550 Manual do Utilizador Página 21