Allied-telesis AT-CM70S Manual do Utilizador descarregar pdf (Página 103)

Converteon Media Converter Line Cards Reference Guide

103

Back-to-Back – Converteon™ Module Configured for Link Test

Figure 50 on page 102 shows a back-to-back configuration for two

Converteon™ modules (Module A and Module B) that has been

configured for the Link Test mode. Refer to “Link Test” on page 44 for

configuring the module of the Link Test mode. Module A is connected to

an AT-8524M (Switch 1) with a copper cable and to Module B with a dual

fiber cable. Module B is connected to a AT-8524M (Switch 2) with a copper

cable.

Table 30 shows the Link LED status for each of the ports involved when

the cables are connected and disconnected from Module A's ports.

Table 30. Back-to-Back – Converteon™ Module in Link Test Mode

Network

Device

Port

Link

Converteon™ Module Cable Status

All Cables

Connected

Copper Cable

Switch 1 to

Module A -

Disconnected

Module A

Transmit/

Receive

Fiber Cable

Disconnected

Port

LINK

Status

Switch 1 Copper

LK LED

ON OFF ON

Converteon™

Module A

Copper

LK LED

ON OFF ON

Fiber

LK LED

ON ON OFF

Converteon™

Module B

Fiber

LK LED

ON ON OFF

Copper

LK LED

ON ON ON

Switch 2 Copper

LK LED

ON ON ON

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 135 136

Comentários a estes Manuais

Sem comentários

Allied-telesis AT-CM70S Manual do Utilizador Página 103

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware de computador Allied-telesis AT-CM70S