Allied-telesis AT-CM70S Manual do Utilizador descarregar pdf (Página 99)

Converteon Media Converter Line Cards Reference Guide

Stand-Alone – Converteon™ Module Configured for Link Test

Figure 49 on page 98 shows a stand-alone configuration for a

Converteon™ line card (Module A) that has been configured for the Link

Test mode. Refer to “Link Test” on page 44 for configuring the module of

the Link Test mode. Module A is connected to an AT-8524M (Switch 1)

with a copper cable and to an AT-8516F/SC (Switch 2) with a dual fiber

cable.

Table 27 shows the Link (LK) LED status for each of the ports involved

when the cables are connected and disconnected from Module A's ports.

Table 27. Stand-Alone – Converteon™ Module in Link Test Mode

Network

Device

Port

Link

Converteon™ Module Cable Status

All Cables

Connected

Copper Cable

Switch 1 to

Module A -

Disconnected

Module A

Transmit/

Receive

Fiber Cable

Disconnected

Port

LINK

Status

Switch 1 Copper

LK LED

ON OFF ON

Converteon™

Module A

Copper

LK LED

ON OFF ON

Fiber

LK LED

ON ON OFF

Switch 2 Fiber

LK LED

ON ON OFF

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 135 136

Comentários a estes Manuais

Sem comentários

Allied-telesis AT-CM70S Manual do Utilizador Página 99

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware de computador Allied-telesis AT-CM70S