Allied-telesis AT-MCF2000M Manual do Utilizador descarregar pdf (Página 55)

AT-MCF2000M Management Module Installation Guide

Verifying the Installation

This procedure verifies the installation of the

AT-MCF2000M Management Module. The procedure

assumes the chassis with the module is powered on.

To verify the installation of the module, perform the

following procedure:

1. Verify that the Power LED on the module is green.

2. If you connected a network cable to the 10/100/

1000Base-T Management Module, verify that the L/A

(Link/Activity) LED is green or amber.

3. If you connected a cable to the Stack port, the Link/

Activity LED for the port should be steady or flashing

green.

Note

If there are any problems, refer to Chapter 3,

“Troubleshooting” on page 63 for assistance.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 69 70

Sem comentários

Allied-telesis AT-MCF2000M Manual do Utilizador Página 55