
AT-S86 Management Software User’s Guide
21
7. Log into the switch using its new IP address.
8. From the main menu, select Save Configuration.
The Save Configuration page is shown in Figure 3.
Figure 3. Save Configuration Page
Note
If you do not save your changes, they are discarded when you
reboot the switch.
9. Click Save.
For information about DHCP, see “Enabling or Disabling DHCP” on
page 22.
Warning
Be sure to record the switch’s IP address in a safe place. When you
change the switch’s IP address you lose your connection. Because
the AT-FS750/48 Fast Ethernet switch does not have a console port,
your only means of managing the switch is through a web browser,
which requires that you have the switch’s IP address.
Comentários a estes Manuais