Allied-telesis AT-SBx81CFC960 Manual do Utilizador descarregar pdf (Página 228)

Chapter 11: Troubleshooting

228 Section II: Installing the Chassis

Local (Console) Management Session

If you are unable to establish a local management session with the switch

through the Console RS-232 port on the controller card, do the following:

 Check to be sure that the RJ-45 serial management cable is

securely connected to the Console RS-232 port on the controller

card and the RS-232 port on the terminal or personal computer.

 If the chassis has two controller cards, you should be able to use

the Console RS-232 port on either card to establish a local

management session with the chassis. If you are unsuccessful

establishing a session on one of the controller cards, try

connecting to the Console RS-232 port on the other card.

 Check to be sure that the operating parameters on the terminal or

the terminal emulation program, if you are using a personal

computer, have been set correctly. The default settings for the RJ-

45 serial terminal port are located in “Using Local Management to

Verify the Chassis” on page 212.

 Check to be sure that the terminal emulator application is

compatible with a VT-100 terminal.

1 2 ... 223 224 225 226 227 228 229 230 231 232 233 ... 321 322

Sem comentários

Allied-telesis AT-SBx81CFC960 Manual do Utilizador Página 228