Allied-telesis AlliedView-EMS 3.10 DEVICE MANAGEMENT Manual do Utilizador descarregar pdf (Página 292)

AlliedView™-EMS 3.10 Device Management Guide Page 292 of 367

Remote Port Info

Displays the remote port cofigurable parameters. Option to view per module

information is displayed.

Note - Values configured for the following parameters will not be reflected on the

CLI:

• Remote Port State

• Remote Port Duplex Status

• Remote Port Ingress Rate Limit

• Remote Port Egress Rate Limit

OAM Menu

From the OAM Menu, you can view information about OAM capabilities of the device.

Note - OAM information may, at times, be displayed for slots in the chassis that do not

actually contain line cards. This happens when a line card is removed or transferred to

another slot without switching off the chassis. Information for the line card that was

removed or transferred is retained in the CPM's memory until the switch is restarted or

until a line card is inserted in the slot vacated.

OAM Config

Displays information about the device's administration status, max OAM PDU size

and configuration revision.

Note - Device Manager does not handle objects of type BITS correctly. As a result,

the Functions Supported parameter will display binary data instead of human-

readable data.

OAM Statistics

Displays information about the device's transmitted and received frames, received

and transmitted loopback OAMPDU's and received and transmitted variable

responses.

OAM Peer Info

Displays information about the device's peer mac address, peer mode and peer

vendor info.

Note - The current firmware version does not return any value for the Peer

Functions Supported and Peer Vendor OUI parameters.

1 2 ... 287 288 289 290 291 292 293 294 295 296 297 ... 366 367

Sem comentários

Allied-telesis AlliedView-EMS 3.10 DEVICE MANAGEMENT Manual do Utilizador Página 292