Allied-telesis AlliedView-EMS 3.10 DEVICE MANAGEMENT Manual do Utilizador descarregar pdf (Página 324)

100

101

AlliedView™-EMS 3.10 Device Management Guide Page 324 of 367

AT-PB300 Series Media Converter Modules

PB301

LED State Description

DUP Green

Gray

The media converter is operating in full-duplex mode.

The media converter is operating in half-duplex mode.

ML Green The Missing Link feature is enabled.

Note - Port A is displayed as an SC connector instead of a VF-45 connector.

Note - The Port A Mode parameter for this module has a fixed value of 'full' and cannot be

modified.

Note - The current firmware version does not allow the Port B Mode parameter to be set

to 'full' from the default value of 'half'. Likewise, it cannot be set to 'half' if it was set to 'full'

using the Omega interface.

Note - Expect the DUP LED to be green when it should be orange and vice-versa when the

Port B Mode parameter is set to 'auto'. This is because the current firmware version is

unable to provide information on the negotiated mode for Port B.

1 2 ... 319 320 321 322 323 324 325 326 327 328 329 ... 366 367

Comentários a estes Manuais

Sem comentários

Allied-telesis AlliedView-EMS 3.10 DEVICE MANAGEMENT Manual do Utilizador Página 324

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware de computador Allied-telesis AlliedView-EMS 3.10 DEVICE MANAGEMENT