Allied-telesis AR720 ROUTER Manual do Utilizador descarregar pdf (Página 11)

AR720 ROUTER QUICK START GUIDE 11

ASYN

Connect the terminal or modem to an asynchronous port on the rear panel of the

AT-AR024 ASYN4 PIC using an approved cable.

2 Check that the terminal or modem’s communication

settings match the settings of the asynchronous port. By default,

asynchronous ports on the AR720 router are set to 9600 baud,

8 data bits, 1 stop bit, no parity and hardware flow control.

Refer to the user manual supplied with the terminal or modem

for details of how to change the communications settings for

the terminal or modem.

If the terminal or modem is to be used with communications

settings other than the default settings, the asynchronous port

must be configured to match the terminal or modem settings

using the SET PORT command. If a modem is being connected,

the CDCONTROL parameter must be set to “CONNECT”

and the FLOW parameter must be set to “HARDWARE”. See

the router’s online help or the AR Series Router Software

Reference for more information.

3 If a modem is being connected, the router must be configured

to make and/or accept calls via the modem. See the router’s

online help or the AR Series Router Software Reference for more

information.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 22 23

Sem comentários

Allied-telesis AR720 ROUTER Manual do Utilizador Página 11