Allied-telesis AT-2711 Series Adapters Manual do Utilizador Página 27

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 26
AT-2711 Series Fast Ethernet Adapter Installation Guide
27
Pre-Installation Checklist
Before installing the AT-2711 series adapter card, check the following list:
1. Check that your computer has an appropriate open PCIe slot.
2. Verify that your system is using the latest BIOS.
3. When you download the driver software from the Allied Telesis
website, record the path to where the driver file resides on your
system.
4. If your system is active, shut it down.
5. When system shutdown is complete, power OFF and unplug your
system.
6. Holding the adapter card by the edges, remove it from its shipping
package and place it on an antistatic surface.
7. Check the adapter for visible signs of damage, particularly on the
card’s edge connector.
Caution
Never attempt to install any damaged adapter card. If the adapter
card is damaged, report it to Allied Telesis. See “Contacting Allied
Telesis” on page 11.
Vista de página 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 135 136

Comentários a estes Manuais

Sem comentários