Allied-telesis AT-2911 Series Adapters Manual do Utilizador descarregar pdf (Página 107)

AT-2911 Series Gigabit Ethernet Network Adapters Installation and User’s Guide

107

Checking a Port LED on the Adapter

Each port has an LED that indicates the link status. The LED functions

once the driver is installed and the cables are connected properly. The

LED is lit is on if data traffic is present.

Before the port LED can provide troubleshooting information, the adapter

must be connected to the network and the network driver for your

particular operating system must be installed.

Before troubleshooting, verify the following:

 The adapter driver software has been installed.

 The adapter is connected to a network.

 The LED operates properly.

To check the LED status, see Table 1 on page 21.

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 119 120

Sem comentários

Allied-telesis AT-2911 Series Adapters Manual do Utilizador Página 107