Allied-telesis AT-2911 Series Adapters Manual do Utilizador descarregar pdf (Página 72)

Chapter 3: Modifying Advanced Properties

TCP/UDP Checksum Offload (IPv4)

The TCP/UDP Checksum Offload (IPv4) function enables the adapter to

compute the checksum of transmitting IPv4 packets and verify the

checksum of receiving IPv4 packets, taking load off from the CPU.

To modify the TCP/UDP Checksum Offload (IPv4) setting, do the

following:

1. Access the Device Manger on your operating system.

See “Accessing Advanced Properties” on page 43.

2. Select TCP/UDP Checksum Offload (IPv4) in the Property box.

The TCP/UDP Checksum Offload (IPv4) page is displayed as shown

in Figure 35.

Figure 35. TCP/UDP Checksum Offload (IPv4) Page

3. Select one of the following options:

 Rx & Tx Enabled— Enables the TCP/UDP Checksum Offload

(IPv4) function for both receiving and transmitting IPv4 packets.

This is the default setting.

 Rx Enabled— Enables the TCP/UDP Checksum Offload (IPv4)

function only for receiving IPv4 packets.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 119 120

Sem comentários

Allied-telesis AT-2911 Series Adapters Manual do Utilizador Página 72