Allied-telesis AT-FS202SC/FS1 Manual do Utilizador descarregar pdf (Página 37)

AT-FS20x Series Installation Guide



You should check to be sure that you are using the appropriate

type of twisted pair cabling. Refer to Table 3 on page 18 for

twisted pair cable specifications.

 Since the twisted pair port, when operating in Auto-Negotiation, is

Auto MDI/MDI-X, you can use either a straight-through or

crossover twisted pair cable to connect any type of network

device to a port on the converter. If you disable Auto-

Negotiationon the port, the port default to MDI-X.

10. Power ON the end-nodes.

11. Verify that the LNK/ACT LEDs for both the fiber optic port and the

twisted pair port are green. If either LED is OFF, refer to

“Troubleshooting” on page 31 for instructions.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 87 88

Sem comentários

Allied-telesis AT-FS202SC/FS1 Manual do Utilizador Página 37