Allied-telesis AT-S39 Manual do Utilizador Página 263

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 299
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 262
Section III: Web Browser Management
263
Modifying a VLAN
To modify a VLAN, perform the following procedure:
1. From the Home page, select Configuration.
2. From the Configuration menu, select Layer 2.
3. From the Layer 2 window, select the VLAN tab.
The VLAN window in Figure 88 on page 260 is displayed.
4. Click the circle next to the name of the VLAN you want to modify.
5. Click Modify.
The configuration window for the VLAN is displayed.
6. Modify the VLAN parameters by referring to Step 5 to Step 8 in the
previous procedure, Creating a VLAN.
When modifying a VLAN, observe the following guidelines:
You cannot change the VID of a VLAN.
You cannot change the name of the Default_VLAN.
When changing a VLANs name or VID, be sure that the new name
or VID is unique on the switch.
7. After making the desired changes, click Apply.
Note
Untagged ports that are added to a VLAN are automatically
removed from their current VLAN assignment. Untagged ports that
are removed from a VLAN are returned to the Default_VLAN.
Removing an untagged port from the Default_VLAN without
assigning it to another VLAN will leave the port as an untagged
member of no VLAN.
The modified VLAN is now ready for network operations.
Vista de página 262
1 2 ... 258 259 260 261 262 263 264 265 266 267 268 ... 298 299

Comentários a estes Manuais

Sem comentários