Allied-telesis AT-S63 Manual do Utilizador descarregar pdf (Página 128)

100

101

Chapter 10: Event Logs and Syslog Client

128 Section II: Advanced Operations

The Create Log Output page is shown in Figure 37.

Figure 37. Create Event Log Output Page

5. Configure the following parameters as necessary:

Output ID

Specifies an identification number for the syslog output definition.

Each definition must be given a unique number. The range is 2 to 20.

The default is the next available number.

Output Status

Controls the status of the syslog output definition. The options are:

Enabled - Enables the output definition. The switch uses the output

definition to send events to the syslog server.

Disabled - Disables the log output. The switch does not use the output

definition.

Message Format

Controls the format of the sent event messages. The options are:

Extended - Sends the time, module, severity, description, file name,

line number, and event ID. This is the default.

Normal - Sends the time, module, severity, and description for each

event.

Severity Selections

Specifies the severity of events to be sent to the syslog server. The

options are:

ALL - Sends all event messages of the following types. Use Ctrl key to

select more than one severity. This is the default.

1 2 ... 123 124 125 126 127 128 129 130 131 132 133 ... 411 412

Comentários a estes Manuais

Sem comentários

Allied-telesis AT-S63 Manual do Utilizador Página 128

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware de computador Allied-telesis AT-S63