Allied-telesis AT-S70 Manual do Utilizador descarregar pdf (Página 105)

AT-S70 Management Software User’s Guide

105

The Show Remote OAM Information Menu, shown in Figure 47, is

displayed.

Figure 47. Show Remote OAM Information Menu

Displaying OAM

Statistics

To display the OAM statistics, perform the following procedure:

1. From the Main Menu, select Module Status and Configuration.

The Module Status and Configuration Menu, shown in Figure 41 on

page 94, is displayed.

2. Select a line card on which you want to configure.

3. Press <Return>.

The Module Configuration Menu, shown in Figure 42 on page 95, is

displayed.

4. Select the port that you want to configure the OAM operations on.

5. Press <Return>.

The Port Management Menu, shown in Figure 43 on page 95, is

displayed.

Show Remote OAM Information

Module = 5, Port = 1

MAC Address 00:0c:46:9a:21:c9 Mux State Forward

Parser State Forward Local Discovering Yes

Local Stable No Remote Discovering No

Remote Stable No Critical Event No

Dying Gasp No Link Fault No

OAM Version 0x01 Config Revision 0x0003

Vendor Info 0x00160001 Vendor OUI 00-30-84

Mode Active Max OAMPDU Size 1518

Loopback Support Yes Event Support No

Variable Support Yes Unidirect Support Yes

Return to OAM Configurations ...

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 133 134

Sem comentários

Allied-telesis AT-S70 Manual do Utilizador Página 105