Allied-telesis Rapier 48w Switch Manual do Utilizador Página 1

A5 Installation and Safety Guide CoverRapier 48w SwitchInstallation and Safety Guide

Rapier 48w Switch10Connect the switch to groundThe protective earth connection should be connected before proceeding with the following power connecti

Installation and Safety Guide113. Connect the A feed -48V wire to the screw terminal labelled “A -” on the rear panel of the switch, and use a flat sc

Rapier 48w Switch12Connecting Data Cables to the SwitchOnce initial configuration is complete, connect the switch to the network.Warning The Ethernet,

Installation and Safety Guide13The SFP transceiver must be inserted the right way in the slot: To install an SFP in port 49 (upper), the handle hinge

Rapier 48w Switch14Configuring the SwitchThe Rapier 48w switch can be configured with the Command Line Interface (CLI). Before configuring the switch,

Installation and Safety Guide154. Change the password.Change the password as soon as possible because a manager account with the default password is a

Rapier 48w Switch16Checking LEDsThe following tables describe how the switch and expansion modules report faults and operational activities. Expansion

Installation and Safety Guide17RJ-45 Port LEDs (Ports 1- 48) SFP Port LEDs (Ports 49 - 50) LED State DescriptionL/A Green 100 M Link establishedFlashi

Rapier 48w Switch18Documentation SetThe complete document set for Rapier Series switches includes the following: This Installation and Safety Guide f

Installation and Safety Guide19StandardsThis product meets the following standards:Category Approval Agency and RequirementElectrical Safety UL60950-1

Rapier 48w Switch2Rapier 48w Switch Installation and Safety GuideDocument Number 613-000757 REV A© 2007 Allied Telesis, Inc. All rights reserved. No p

Rapier 48w Switch20SafetyWARNING: In a domestic environment this product may cause radio interference in which case the user may be required to take a

Installation and Safety Guide21Always connect the wiring to the LAN equipment first before connecting the wiring to the breaker. To avoid the danger o

Rapier 48w Switch225. Remove the telephone cord from the unit prior to making changes to the expansion port. Save these instructionsConnection to ISDN

Installation and Safety Guide23US Federal Communications Commission (FCC)This equipment complies with Part 68 of the Federal Communications Commission

Rapier 48w Switch24Canadian Department of CommunicationsThe Industry Canada label identifies certified equipment. This certification means that the eq

Installation and Safety Guide3ContentsSwitches Covered By This Guide ...

Rapier 48w Switch4Switches Covered By This GuideThis document includes information on the following switches: Rapier 48wYou can download updates to t

Installation and Safety Guide5Selecting a SiteBefore you install the switch, review the following considerations about its location. For compatibilit

Rapier 48w Switch6Installing the SwitchPorts on the switch are suitable only for connections within buildings (intra-building) and with cables unexpos

Installation and Safety Guide7Preparation for NEBSTo ensure rack-mounted installations are earthed for compatibility with Network Equipment Building S

Rapier 48w Switch8Install the air filtersFor compatibility with Network Equipment Building System (NEBS), this switch requires a filtered air supply.

Installation and Safety Guide9Applying Power to the SwitchThe specific power supply requirements for the Rapier 48w are clearly displayed on the rear