Allied-telesis Rapier 48w Switch Manual do Utilizador Página 6
- Página / 24
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
Rapier 48w Switch
6
Installing the Switch
Ports on the switch are suitable only for connections within buildings (intra-
building) and with cables unexposed to the outside.
You can install the switch on a level surface, such as a desktop or bench, in a
standard 19-inch rack, or in a 23-inch rack.
Before you begin
■ Read the safety information.
For your well-being and that of the equipment, read the safety information in
this document. You can also download this document
from
www.alliedtelesis.com/support/software.
■ Verify the package contents if you have not already done so.
See “Package Contents” on page 4. If any items are damaged or missing,
contact your authorised distributor or reseller.
■ Gather necessary tools and equipment:
• a Phillips #2 screwdriver for fitting the rack-mount brackets
• four rack-mount screws and cage nuts (if required)
• a flat screwdriver for the captive screws on the fan units and the DC
power connection
• a suitable spanner for tightening the nuts on the chassis grounding stud
• an appropriate DC power source, DC supply cable, ring connectors,
wire strippers, and a PANDUIT Uni-Die® dieless crimping toolset
■ Prepare the cabinet in a suitable location
Follow guidelines described in “Selecting a Site” on page 5 to choose an
appropriate location and modify the rack as necessary.
You can install the switch in a 19-inch rack, a 23-inch rack, or on a flat bench.
■ If you have an optional Network Service Module (NSM), or Port Interface
Cards (PICs), install them in the switch first.
For details, refer to the Network Service Module Installation and Safety Guide and
the Port Interface Card Installation and Safety Guide. These guides are shipped
with each NSM or PIC. You can also download them from
www.alliedtelesis.com/support/software.
- Rapier 48w Switch 1
- Installation and Safety Guide 1
- Contents 3
- Package Contents 4
- Selecting a Site 5
- Installing the Switch 6
- Preparation for NEBS 7
- Rack-mount the switch 7
- Install the air filters 8
- Applying Power to the Switch 9
- Connect the switch to ground 10
- Connect the DC supplies 10
- 40-60VDC 11
- 4.5A MAX 11
- DUAL INPUTS 11
- Gigabit SFP ports 12
- SFP Transceiver 13
- Release Lever 13
- Configuring the Switch 14
- Checking LEDs 16
- Documentation Set 18
- Standards 19
- Telecommunications Interfaces 21
- Connection to ISDN network 22
(2 páginas)
Comentários a estes Manuais