Allied Telesis AT-FS232 Guia de Instalação descarregar pdf (Página 37)

AT-FS232 and AT-FS232/x Series Installation Guide

Warning

When installing this equipment, always ensure that the frame ground

connection is installed first and disconnected last. 16

Figure 15 Connecting the Stripped Wire

6. Connect the negative feed wire to the terminal block marked (-).

7. Connect the positive feed wire to the terminal block marked (+).

8. Connect the other end of the wires to the terminal block on the

AT-PWR237 power adapter or approved SELV power source per IEC

60950 (rated minimum 12-50VDC, 0.5A).

Figure 16 Connecting the Stripped Wires to the Optional AT-PWR237 Power Adapter

Note

The optional AT-PWR237 module does not have a terminal for the

ground feed wire. Connect the ground wire from the bridging converter

to the nearest chassis ground.

12-50VDC

21 34

1222

PORT

100

HALF

FULL

OFF

DUPLEX

MODE

AUTO

NEG

SPEED

(Mbps)

APS

.: A

-7

-1

: 1

, 5

-6

, 1

: 1

, 2

For Indoor Use Only.

ADVANCED POWER SOLUTIONS

TEL: (925)456-9890

Use only with duplex receptacle having center screw

Secure unit in place by receptacle cover screw

Cable type "DP-1" or "DP-2"

LISTED

I.T.E.POWER

SUPPLY

4Z38

JX-01

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 73 74

Comentários a estes Manuais

Sem comentários

Allied Telesis AT-FS232 Guia de Instalação Página 37

Comentários a estes Manuais

Manuais e produtos relacionados com Transceptores de rede Allied Telesis AT-FS232