Allied Telesis AT-S80 Guia do Utilizador descarregar pdf (Página 190)

Chapter 17: Port Trunking

190 Section II: Using the Web Browser Interface

Creating a Port Trunk

This procedure explains how to create a port trunk.

Caution

Do not connect the cables to the ports on the switches until after you

have configured the trunk with the management software.

Connecting the cables before configuring the software can create a

loop in the network topology. A loop can cause a broadcast storm

and poor network performance.

To create a port trunk, perform the following procedure:

1. From the Advanced Config menu, select Trunk Config.

The Trunk Configuration page is shown in Figure 55.

Figure 55. Trunk Configuration Page

If the switch does not contain a port trunk, all of the ports on the switch

are unchecked. If there is a port trunk, the ports in the trunk are

checked.

1 2 ... 185 186 187 188 189 190 191 192 193 194 195 ... 241 242

Sem comentários

Allied Telesis AT-S80 Guia do Utilizador Página 190