Allied-telesis AT-8324 Manual do Utilizador descarregar pdf (Página 17)

AT-8316F and AT-8324 Quick Install Guide

You are now ready to use the Omega management software to configure the

switch. For instructions, refer to the AT-S25 Management Software User’s

Guide. This guide is available on the Allied Telesyn web site at

www.alliedtelesyn.com/techhome.htm.

Switch LEDs

Table 2 and Table 3 describe the functions of the LEDs on the Ethernet

switch.

Table 2

Power and Fault LEDs

LED State Description

Fault Solid Red The switch or management software is malfunctioning.

Flashing Red The switch is booting, running diagnostic tests, writing

images to Flash, or transferring files using XMODEM or

TFTP.

OFF Normal operation.

Master Solid Amber The switch is functioning as the master switch of the

stack.

Flashing Amber The switch is building a topology of the Ethernet stack.

OFF The switch is installed as a standalone unit or is

functioning as a slave switch in a stack.

RPS (Redundant

Power Supply)

Solid Green The RPS is connected to the switch. To verify that the

RPS is operating correctly, refer to the instructions in the

RPS Quick Install Guide.

Power Solid Green The switch is receiving power, voltage is within the

acceptable range, and the power supply is working.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 37 38

Sem comentários

Allied-telesis AT-8324 Manual do Utilizador Página 17