Allied-telesis AT-8324 Manual do Utilizador descarregar pdf (Página 18)

AT-S25 Software Default Setting

Table 3

Port LED Status

For information on troubleshooting the switch, refer to the AT-8316F/MT,

AT-8316F/VF, AT-8316F/SC, and AT-8324 Installation Guide.

AT-S25 Software Default Setting

Table 4 lists the default settings for the AT-S25 software that comes pre-

installed on the Ethernet switch.

Table 4

Ethernet Switch Default Settings

LEDs State Description

L/A (Link/Activity) Solid Green This indicates a 100 Mbps link.

Flashing Green This indicates 100 Mbps activity

Solid Amber This indicates a 10 Mbps link (10/100 ports only).

Flashing Amber This indicates 10 Mbps activity (10/100 Mbps

ports only).

D/C (Duplex/Collision) Solid Green The port is operating at full-duplex.

Solid Amber The port is operating at half-duplex.

Flashing Amber Collisions are occuring on the line.

Settings Default

IP Address 0.0.0.0

Subnet Mask 0.0.0.0

Gateway Address 0.0.0.0

Get community string public

Set community string private

Trap community string public

Spanning Tree Protocol Disabled

Bridge Priority 32768

Max Age Time 20

Hello time 2

Forwarding Delay 15

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 37 38

Sem comentários

Allied-telesis AT-8324 Manual do Utilizador Página 18