Allied-telesis AT-SBx3106WMB Manual do Utilizador descarregar pdf (Página 16)

Installation Instructions

Figure 3. Minimum Area Dimensions When the Chassis has DC Power

Supplies

The minimum space on the back panel of the chassis can be reduced to

15 cm (6 in.) when the device has DC power supplies because the power

wires are connected to the front panel of the power supplies. However, the

minimum space on the front panel must remain at 51 cm (20 in.) to allow

for the installation of the line cards and power supplies.

Wallboard

Requirements

Please observe the following guidelines if you are installing the chassis on

wallboard:

 The brackets are designed for wood studs at 16” intervals.

 You should use a stud finder to locate and mark the middle of the

studs and to identify the locations of metal conduits and any hot

AC wiring in the reserved wall area.

 All four bracket screws should be fastened to studs in the

wallboard. Refer to Figure 4 on page 17.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 43 44

Sem comentários

Allied-telesis AT-SBx3106WMB Manual do Utilizador Página 16