Allied-telesis AT-9000 Series Manual do Utilizador Página 147
- Página / 148
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
AT-9000 Switch Command Line User’s Guide
119
LINE VTY
Syntax
line vty
first_line_id [last_line_id]
Parameters
first_line_id
Specifies the number of a VTY line. The range is 0 to 9.
last_line_id
Specifies the number of a VTY line. The range is 0 to 9. This is an
optional parameter.
Mode
Global Configuration mode
Description
Use this command to enter the Virtual Terminal Line mode for a VTY line
or a range of VTY lines, to set the session timer or to activate or deactivate
remote authentication for Telnet or SSH management sessions.
Refer to “EXEC-TIMEOUT” on page 114 to set session timeout values and
“LOGIN AUTHENTICATION” on page 1387 to activate remote
authentication.
Examples
This example enters the Virtual Terminal Line mode for VTY line 0:
awplus> enable
awplus# configure terminal
awplus(config)# line vty 0
awplus(config-line)#
This example enters the Virtual Terminal Line mode for all VTY lines:
awplus> enable
awplus# configure terminal
awplus(config)# line vty 0 9
awplus(config-line)#
- AT-9000 Series 1
- Copyright 2
- Contents 10
- Document Conventions 38
- Contacting Allied Telesis 40
- Getting Started 41
- AlliedWare Plus Command Line 43
- Interface 43
- Management Sessions 44
- Remote Telnet Management 45
- Web Browser Windows 45
- Management Interfaces 47
- Local Manager Account 48
- AlliedWare Plus Command Modes 49
- Moving Down the Hierarchy 52
- INTERFACE 54
- Command 54
- Static Port Trunk 54
- VLAN Command 54
- Moving Up the Hierarchy 56
- DISABLE command 57
- Port Numbers in Commands 58
- Combo Ports 25 to 28 60
- Command Format 61
- Startup Messages 62
- Starting a Management Session 65
- What to Configure First 70
- Changing the 71
- Login Password 71
- Assigning a Name 71
- Adding a 72
- Management IP 72
- Saving Your 74
- Ending a Management Session 75
- Basic Command Line Management 77
- Clearing the Screen 78
- Displaying the On-line Help 79
- ? (Question Mark Key) 85
- CLEAR SCREEN 87
- CONFIGURE TERMINAL 88
- Chapter 5 101
- Overview 102
- Controlling Eco-Mode LED 104
- Temperature and Fan Control 105
- Commands 105
- ECOFRIENDLY LED 106
- NO ECOFRIENDLY LED 107
- SHOW ECOFRIENDLY 108
- SHOW SYSTEM ENVIRONMENT 109
- Parameter Description 110
- Basic Operations 111
- Basic Switch Management 113
- Adding a Name to the Switch 114
- Contact: JordanB 115
- Displaying Parameter Settings 116
- Pinging Network Devices 118
- Resetting the Switch 119
- filename2 121
- “SHOW BAUD-RATE” on page 128 123
- Configuring the Banners 127
- Chapter 8 131
- BANNER EXEC 133
- BANNER LOGIN 135
- BANNER MOTD 137
- BAUD-RATE SET 139
- CLOCK SET 140
- ERASE STARTUP-CONFIG 141
- EXEC-TIMEOUT 142
- HOSTNAME 145
- LINE CONSOLE 146
- LINE VTY 147
- NO HOSTNAME 148
- PING IPv6 151
- SERVICE MAXMANAGER 154
- SHOW BANNER LOGIN 155
- SHOW BAUD-RATE 156
- SHOW CLOCK 157
- SHOW RUNNING-CONFIG 158
- SHOW SWITCH 159
- SHOW SYSTEM 161
- SHOW USERS 163
- SHOW VERSION 165
- SNMP-SERVER CONTACT 166
- SNMP-SERVER LOCATION 167
- SYSTEM TERRITORY 168
- Port Parameters 171
- Adding Descriptions 172
- Chapter 9: Port Parameters 174
- Enabling or Disabling Ports 176
- Resetting Ports 181
- Displaying Port 188
- Displaying SFP Information 190
- Port Parameter Commands 191
- Command Mode Description 193
- BACKPRESSURE 194
- CLEAR PORT COUNTER 197
- DESCRIPTION 198
- EGRESS-RATE-LIMIT 202
- FCTRLLIMIT 203
- FLOWCONTROL 204
- HOLBPLIMIT 207
- NO EGRESS-RATE-LIMIT 209
- NO FLOWCONTROL 210
- NO SHUTDOWN 211
- NO SNMP TRAP LINK-STATUS 212
- NO STORM-CONTROL 213
- POLARITY 214
- RENEGOTIATE 217
- SHOW FLOWCONTROL INTERFACE 219
- SHOW INTERFACE 221
- Interface Port number 222
- SHOW INTERFACE BRIEF 225
- SHOW INTERFACE STATUS 227
- Parameter 229
- SHOW RUNNING-CONFIG INTERFACE 232
- SHOW STORM-CONTROL 233
- SHOW SYSTEM PLUGGABLE 235
- SHOW SYSTEM PLUGGABLE DETAIL 236
- SHUTDOWN 237
- SNMP TRAP LINK-STATUS 238
- STORM-CONTROL 241
- Power Over Ethernet 243
- Prioritization 245
- Enabling and Disabling PoE 246
- Prioritizing Ports 249
- Managing Legacy PDs 251
- Monitoring Power Consumption 252
- Displaying PoE Information 253
- Power Over Ethernet Commands 255
- NO POWER-INLINE ALLOW-LEGACY 258
- NO POWER-INLINE DESCRIPTION 259
- NO POWER-INLINE ENABLE 260
- NO POWER-INLINE MAX 261
- NO POWER-INLINE PRIORITY 262
- NO SERVICE POWER-INLINE 264
- POWER-INLINE ALLOW-LEGACY 266
- POWER-INLINE DESCRIPTION 267
- POWER-INLINE ENABLE 268
- POWER-INLINE MAX 269
- POWER-INLINE PRIORITY 270
- POWER-INLINE USAGE-THRESHOLD 272
- SERVICE POWER-INLINE 273
- SHOW POWER-INLINE 274
- SHOW POWER-INLINE INTERFACE 279
- Chapter 13 285
- Adding an IPv4 289
- Management 289
- Default Gateway 291
- Deleting an IPv4 292
- Address and 292
- Displaying an 293
- Adding an IPv6 294
- Deleting an IPv6 296
- CLEAR IPV6 NEIGHBORS 301
- IP ADDRESS 302
- IP ADDRESS DHCP 304
- IP ROUTE 306
- 143.87.132.45: 307
- IPV6 ADDRESS 308
- IPV6 ROUTE 310
- 45ab:672:934c::78:17cb: 311
- NO IP ADDRESS 312
- NO IP ADDRESS DHCP 313
- NO IP ROUTE 314
- NO IPV6 ADDRESS 315
- NO IPV6 ROUTE 316
- SHOW IP INTERFACE 317
- SHOW IP ROUTE 318
- SHOW IPV6 INTERFACE 320
- SHOW IPV6 ROUTE 321
- Chapter 15 323
- SNTP Server 325
- Disabling the SNTP Client 328
- Displaying the SNTP Client 329
- Displaying the Date and Time 330
- SNTP Client Commands 331
- CLOCK SUMMER-TIME 332
- CLOCK TIMEZONE 333
- NO CLOCK SUMMER-TIME 334
- NO NTP PEER 335
- NTP PEER 336
- PURGE NTP 337
- SHOW NTP ASSOCIATIONS 339
- SHOW NTP STATUS 341
- Adding Static MAC Addresses 346
- Deleting MAC Addresses 348
- Setting the Aging Timer 350
- Chapter 17: MAC Address Table 352
- MAC Address Table Commands 353
- CLEAR MAC ADDRESS-TABLE 354
- MAC ADDRESS-TABLE AGEING-TIME 356
- MAC ADDRESS-TABLE STATIC 358
- NO MAC ADDRESS-TABLE STATIC 360
- SHOW MAC ADDRESS-TABLE 362
- Chapter 19: Enhanced Stacking 368
- Save the configuration 371
- Configuring a Member Switch 372
- Member Switches 378
- Disabling Enhanced Stacking 387
- Enhanced Stacking Commands 389
- ESTACK COMMAND-SWITCH 391
- ESTACK RUN 392
- NO ESTACK COMMAND-SWITCH 393
- NO ESTACK RUN 394
- RCOMMAND 395
- REBOOT ESTACK MEMBER 396
- SHOW ESTACK 398
- SHOW ESTACK COMMAND-SWITCH 400
- SHOW ESTACK REMOTELIST 401
- UPLOAD CONFIG REMOTELIST 403
- UPLOAD IMAGE REMOTELIST 404
- Port Mirror 407
- Chapter 21: Port Mirror 410
- Displaying the Port Mirror 413
- Port Mirror Commands 415
- MIRROR INTERFACE 417
- NO MIRROR INTERFACE 419
- SHOW MIRROR 420
- (IGMP) Snooping 423
- Host Node Topology 426
- Enabling IGMP Snooping 427
- Disabling IGMP Snooping 430
- Displaying IGMP Snooping 431
- IGMP Snooping Commands 433
- CLEAR IP IGMP 434
- IP IGMP LIMIT 435
- IP IGMP QUERIER-TIMEOUT 436
- IP IGMP SNOOPING 437
- IP IGMP SNOOPING MROUTER 440
- IP IGMP STATUS 441
- NO IP IGMP SNOOPING 442
- NO IP IGMP SNOOPING MROUTER 443
- SHOW IP IGMP SNOOPING 444
- Multicast Commands 447
- File System 453
- destinationfile 457
- Chapter 26: File System 460
- File System Commands 463
- DELETE FORCE 466
- SHOW FILE SYSTEMS 469
- Boot Configuration Files 471
- Chapter 29 477
- BOOT CONFIG-FILE 478
- COPY RUNNING-CONFIG 480
- NO BOOT CONFIG-FILE 483
- SHOW BOOT 484
- SHOW STARTUP-CONFIG 486
- File Transfer 489
- Downloading 491
- Software with 491
- Files to the 492
- Switch with 492
- Uploading Files 493
- 20100601091645.txt 494
- Waiting to send 497
- Chapter 30: File Transfer 498
- File Transfer Commands 501
- COPY FILENAME ZMODEM 502
- COPY FLASH TFTP 503
- COPY TFTP FLASH 504
- COPY ZMODEM 506
- Event Messages 509
- Event Log 511
- Displaying the Event Log 513
- Clearing the Event Log 514
- Event Log Commands 515
- CLEAR LOG BUFFERED 516
- LOG BUFFERED 517
- NO LOG BUFFERED 519
- OUtputID Type Status Details 520
- SHOW LOG 521
- SHOW LOG CONFIG 524
- SHOW LOG REVERSE 525
- SHOW LOG TAIL 526
- Syslog Client 527
- program 529
- Chapter 34: Syslog Client 530
- Syslog Client Commands 535
- LOG HOST 536
- NO LOG HOST 538
- Port Trunks 541
- Static Port Trunks 543
- Displaying Static Port Trunks 551
- Static Port Trunk Commands 553
- NO STATIC-CHANNEL-GROUP 554
- PORT-CHANNEL LOAD-BALANCE 555
- SHOW STATIC-CHANNEL-GROUP 557
- STATIC-CHANNEL-GROUP 558
- Chapter 38 561
- Load Distribution 563
- Creating New Aggregators 565
- Adding Ports to Aggregators 567
- Deleting Aggregators 569
- Displaying Aggregators 570
- LACP Commands 573
- CHANNEL-GROUP 574
- LACP SYSTEM-PRIORITY 576
- NO CHANNEL-GROUP 577
- SHOW ETHERCHANNEL 580
- SHOW ETHERCHANNEL DETAIL 581
- Chapter 39: LACP Commands 582
- SHOW ETHERCHANNEL SUMMARY 583
- SHOW LACP SYS-ID 584
- SHOW PORT ETHERCHANNEL 585
- Spanning Tree Protocols 587
- STP, RSTP and MSTP Protocols 589
- Path Costs and Port Costs 592
- Port Priority 593
- Point-to-Point and Edge Ports 596
- Edge Port 597
- Point-to-Point and Edge Port 597
- Workstation 597
- (Full-duplex Mode) 597
- Mixed STP and RSTP Networks 598
- Spanning Tree and VLANs 599
- RSTP and MSTP BPDU Guard 600
- STP, RSTP, MSTP Loop Guard 602
- STP and RSTP Root Guard 607
- Spanning Tree Protocol (STP) 609
- Procedures 609
- Setting the Switch Parameters 612
- Setting the Port Parameters 614
- Displaying STP Settings 616
- STP Commands 617
- Chapter 42: STP Commands 618
- NO SPANNING-TREE STP ENABLE 619
- SHOW SPANNING-TREE 620
- SPANNING-TREE FORWARD-TIME 622
- SPANNING-TREE GUARD ROOT 623
- SPANNING-TREE HELLO-TIME 624
- SPANNING-TREE MAX-AGE 625
- SPANNING-TREE MODE STP 626
- SPANNING-TREE PATH-COST 627
- SPANNING-TREE PORTFAST 628
- SPANNING-TREE STP ENABLE 632
- Setting the 636
- Forward Time 636
- Hello Time, and 636
- Setting the Bridge 637
- Priority 637
- Enabling or 637
- Disabling BPDU 637
- Configuring Port 639
- Displaying RSTP Settings 644
- RSTP Commands 645
- Chapter 44: RSTP Commands 646
- NO SPANNING-TREE PORTFAST 647
- NO SPANNING-TREE LOOP-GUARD 649
- NO SPANNING-TREE RSTP ENABLE 651
- SPANNING-TREE LINK-TYPE 659
- SPANNING-TREE LOOP-GUARD 660
- SPANNING-TREE MODE RSTP 662
- SPANNING-TREE RSTP ENABLE 668
- Chapter 45 669
- MSTI Guidelines 673
- VLAN and MSTI Associations 674
- Ports in Multiple MSTIs 675
- Guidelines 678
- Summary of Guidelines 681
- Associating VLANs to MSTIs 683
- MSTP Root Guard 687
- MSTP Commands 689
- Chapter 46: MSTP Commands 690
- INSTANCE MSTI-ID PRIORITY 691
- INSTANCE MSTI-ID VLAN 693
- NO SPANNING-TREE MSTP ENABLE 696
- SHOW SPANNING-TREE MST CONFIG 698
- SHOW SPANNING-TREE MST 699
- SPANNING-TREE MODE MSTP 704
- SPANNING-TREE MSTP ENABLE 705
- SPANNING-TREE MST INSTANCE 707
- <region-name> 711
- REVISION 712
- Virtual LANs 713
- Port-based and Tagged VLANs 715
- Port-based VLANs 717
- Tagged VLANs 717
- Port-based VLAN Overview 718
- Port VLAN 719
- Identifier 719
- Port-based 721
- Example 1 721
- Example 2 722
- Tagged VLAN Overview 724
- Tagged VLAN 726
- Creating VLANs 729
- Adding Tagged Ports to VLANs 732
- Deleting VLANs 736
- Displaying the VLANs 737
- Port-based and Tagged VLAN 739
- NO SWITCHPORT ACCESS VLAN 740
- NO SWITCHPORT TRUNK 741
- SHOW VLAN 744
- SWITCHPORT ACCESS VLAN 746
- SWITCHPORT MODE ACCESS 748
- SWITCHPORT MODE TRUNK 749
- SWITCHPORT TRUNK ALLOWED VLAN 751
- SWITCHPORT TRUNK NATIVE VLAN 754
- Chapter 49 759
- Figure 137. GVRP Example 761
- GVRP and Network Security 764
- Enabling GVRP on the Switch 766
- Enabling GIP on the Switch 767
- Enabling GVRP on the Ports 768
- Setting the GVRP Timers 769
- Disabling GVRP on the Ports 771
- Disabling GIP on the Switch 772
- Disabling GVRP on the Switch 773
- Displaying GVRP 775
- CONVERT DYNAMIC VLAN 779
- GVRP APPLICANT STATE ACTIVE 780
- GVRP APPLICANT STATE NORMAL 781
- GVRP ENABLE 782
- GVRP REGISTRATION 783
- GVRP TIMER JOIN 784
- GVRP TIMER LEAVE 785
- GVRP TIMER LEAVEALL 786
- NO GVRP ENABLE 787
- NO GVRP TIMER JOIN 788
- NO GVRP TIMER LEAVE 789
- NO GVRP TIMER LEAVEALL 790
- PURGE GVRP 791
- SHOW GVRP APPLICANT 792
- SHOW GVRP CONFIGURATION 793
- SHOW GVRP MACHINE 794
- SHOW GVRP STATISTICS 795
- Receive GARP Messages: Empty 796
- Transmit GARP Messages: Empty 796
- SHOW GVRP TIMER 797
- MAC Address-based VLANs 799
- VLANs that Span 803
- Switches 803
- General Steps 806
- Removing MAC Addresses 809
- Displaying VLANs 811
- Chapter 52 815
- macaddress 817
- SHOW VLAN MACADDRESS 820
- VLAN MACADDRESS 822
- Sales and the VID 3: 823
- Private Port VLANs 829
- Private VLAN 831
- Functionality 831
- Creating Private VLANs 833
- Adding Host and Uplink Ports 834
- Displaying Private VLANs 836
- Private Port VLAN Commands 837
- PRIVATE-VLAN 839
- SHOW VLAN PRIVATE-VLAN 840
- Voice VLAN Commands 843
- NO SWITCHPORT VOICE VLAN 844
- SWITCHPORT VOICE DSCP 845
- SWITCHPORT VOICE VLAN 846
- VLAN Stacking 849
- Section III: File System 823 851
- Components 852
- VLAN Stacking Process 853
- Example of VLAN Stacking 854
- Section III: File System 827 855
- Chapter 56: VLAN Stacking 856
- 828 Section III: File System 856
- Section III: File System 829 857
- 830 Section III: File System 858
- VLAN Stacking Commands 859
- NO SWITCHPORT VLAN-STACKING 860
- PLATFORM VLAN-STACKING-TPID 861
- SHOW VLAN VLAN-STACKING 862
- SWITCHPORT VLAN-STACKING 863
- 836 Section III: File System 864
- Port Security 865
- Chapter 58 867
- Configuring Ports 870
- INTERFACE Command 875
- NO SWITCHPORT PORT-SECURITY 878
- SHOW PORT-SECURITY INTERFACE 880
- SWITCHPORT PORT-SECURITY 885
- Chapter 60 891
- Authentication Process 893
- Port Roles 894
- Single host mode 897
- Multi host mode 897
- Multi supplicant mode 897
- Multi Supplicant 899
- Supplicant VLAN 903
- Attributes on the 903
- RADIUS Server 903
- Guest VLAN 904
- RADIUS Accounting 905
- Operating Modes 911
- Configuring Reauthentication 913
- Control Commands 919
- AUTH DYNAMIC-VLAN-CREATION 923
- VLAN assignments: 924
- AUTH GUEST-VLAN 925
- AUTH HOST-MODE 926
- AUTH REAUTHENTICATION 928
- AUTH TIMEOUT QUIET-PERIOD 929
- AUTH TIMEOUT REAUTH-PERIOD 930
- AUTH TIMEOUT SERVER-TIMEOUT 931
- AUTH TIMEOUT SUPP-TIMEOUT 932
- AUTH-MAC ENABLE 933
- AUTH-MAC REAUTH-RELEARNING 934
- DOT1X CONTROL-DIRECTION 935
- DOT1X EAP 937
- DOT1X INITIALIZE INTERFACE 939
- DOT1X MAX-REAUTH-REQ 940
- DOT1X PORT-CONTROL AUTO 941
- DOT1X TIMEOUT TX-PERIOD 944
- NO AUTH DYNAMIC-VLAN-CREATION 946
- NO AUTH GUEST-VLAN 947
- NO AUTH REAUTHENTICATION 948
- NO AUTH-MAC ENABLE 949
- NO DOT1X PORT-CONTROL 950
- SHOW AUTH-MAC INTERFACE 951
- SHOW DOT1X 955
- SHOW DOT1X INTERFACE 956
- Section IX 959
- SNMPv1 and SNMPv2c 961
- Enabling SNMPv1 and SNMPv2c 964
- Creating Community Strings 965
- Deleting Community Strings 968
- Disabling SNMPv1 and SNMPv2c 969
- Displaying SNMPv1 and SNMPv2c 970
- Exec mode: 971
- SNMPv1 and SNMPv2c Commands 973
- NO SNMP-SERVER 975
- NO SNMP-SERVER COMMUNITY 976
- NO SNMP-SERVER ENABLE TRAP 977
- Global Configuration mode 978
- SHOW RUNNING-CONFIG SNMP 983
- SHOW SNMP-SERVER COMMUNITY 985
- SNMP-SERVER COMMUNITY 989
- SNMP-SERVER ENABLE TRAP 990
- SNMP-SERVER ENABLE TRAP AUTH 991
- SNMPv3 Commands 997
- NO SNMP-SERVER ENGINEID LOCAL 1000
- NO SNMP-SERVER GROUP 1001
- NO SNMP-SERVER HOST 1002
- NO SNMP-SERVER USER 1004
- NO SNMP-SERVER VIEW 1005
- SHOW SNMP-SERVER 1006
- SHOW SNMP-SERVER GROUP 1007
- SHOW SNMP-SERVER HOST 1008
- SHOW SNMP-SERVER USER 1009
- SHOW SNMP-SERVER VIEW 1010
- SNMP-SERVER 1011
- SNMP-SERVER ENGINEID LOCAL 1012
- SNMP-SERVER GROUP 1013
- Examples 1014
- SNMP-SERVER HOST 1015
- Chapter 64: SNMPv3 Commands 1016
- SNMP-SERVER USER 1017
- Confirmation Command 1018
- SNMP-SERVER VIEW 1019
- Network Management 1021
- Chapter 65 1023
- Configuring the sFlow Agent 1026
- Configuring the Ports 1027
- Configuring the 1028
- Polling Interval 1028
- Enabling the sFlow Agent 1029
- Disabling the sFlow Agent 1030
- Displaying the sFlow Agent 1031
- Configuration Example 1032
- Chapter 65: sFlow Agent 1034
- Chapter 66 1035
- NO SFLOW COLLECTOR IP 1036
- NO SFLOW ENABLE 1037
- SFLOW COLLECTOR IP 1038
- SFLOW ENABLE 1039
- SFLOW POLLING-INTERVAL 1040
- SFLOW SAMPLING-RATE 1042
- SHOW SFLOW 1044
- LLDP and LLDP-MED 1047
- Mandatory 1049
- LLDP TLVs 1049
- Optional LLDP 1049
- MED TLVs 1051
- Chapter 67: LLDP and LLDP-MED 1054
- port-description 1056
- link-aggregation 1056
- mac-phy-config 1056
- Capabilities 1058
- Network-policy 1058
- Use the SHOW LLDP 1059
- INTERFACE command to confirm 1059
- Removing LLDP TLVs from Ports 1069
- Displaying Port Settings 1074
- Displaying Port TLVs 1077
- LLDP and LLDP-MED Commands 1079
- CLEAR LLDP STATISTICS 1082
- CLEAR LLDP TABLE 1083
- LLDP HOLDTIME-MULTIPLIER 1084
- LLDP LOCATION 1085
- LLDP MANAGEMENT-ADDRESS 1087
- LLDP MED-NOTIFICATIONS 1089
- LLDP MED-TLV-SELECT 1090
- LLDP NOTIFICATIONS 1093
- LLDP NOTIFICATION-INTERVAL 1094
- LLDP REINIT 1095
- LLDP RUN 1096
- LLDP TIMER 1097
- LLDP TLV-SELECT 1098
- LLDP TRANSMIT RECEIVE 1101
- LLDP TX-DELAY 1102
- LOCATION CIVIC-LOCATION 1103
- LOCATION COORD-LOCATION 1106
- LOCATION ELIN-LOCATION 1109
- NO LLDP MED-NOTIFICATIONS 1110
- NO LLDP MED-TLV-SELECT 1111
- NO LLDP NOTIFICATIONS 1113
- NO LLDP RUN 1114
- NO LLDP TLV-SELECT 1115
- NO LLDP TRANSMIT RECEIVE 1116
- NO LOCATION 1117
- SHOW LLDP 1119
- SHOW LLDP INTERFACE 1121
- Parameters 1123
- Description 1123
- SHOW LLDP NEIGHBORS DETAIL 1125
- Voice VLAN ID 1128
- SHOW LLDP NEIGHBORS INTERFACE 1130
- SHOW LLDP STATISTICS 1132
- SHOW LOCATION 1136
- Chapter 69 1139
- Adding Static ARP Entries 1141
- Displaying the ARP Table 1143
- CLEAR ARP-CACHE 1148
- NO ARP (IP ADDRESS) 1149
- SHOW ARP 1150
- Chapter 71 1153
- RMON Port Statistics 1155
- Viewing Statistics 1156
- Deleting Statistics 1156
- RMON Histories 1157
- Displaying 1158
- History Groups 1158
- Deleting History 1159
- RMON Alarms 1160
- Creating RMON 1161
- Statistics Groups 1161
- Creating an 1163
- Alarm - Example 1163
- Enter_log_message 1164
- Chapter 71: RMON 1166
- Phase 3: Creating the Event 1167
- Phase 4: Creating the Alarm 1167
- Use the SHOW RMON ALARM 1168
- RMON Commands 1169
- Chapter 72: RMON Commands 1170
- NO RMON ALARM 1171
- NO RMON COLLECTION HISTORY 1172
- NO RMON COLLECTION STATS 1173
- NO RMON EVENT 1174
- RMON ALARM 1175
- RMON COLLECTION HISTORY 1178
- RMON COLLECTION STATS 1180
- RMON EVENT LOG 1181
- RMON EVENT LOG TRAP 1182
- RMON EVENT TRAP 1184
- SHOW RMON ALARM 1186
- SHOW RMON EVENT 1188
- SHOW RMON HISTORY 1190
- SHOW RMON STATISTICS 1192
- Chapter 73 1193
- Creating ACLs 1197
- Creating 1209
- Numbered MAC 1209
- Assigning ACLs to Ports 1212
- Assigning MAC 1213
- Address ACLs to 1213
- Removing ACLs from Ports 1215
- Restricting Remote Access 1217
- ACLs to VTY 1218
- Assigning Named 1219
- IPv4 and IPv6 1219
- Unrestricting Remote Access 1222
- Displaying the ACLs 1224
- Displaying ACLs 1225
- Assigned to VTY 1225
- ACL Commands 1227
- Chapter 74: ACL Commands 1228
- ACCESS-CLASS 1229
- ACCESS-GROUP 1231
- ACCESS-LIST (MAC Address) 1233
- Confirmation Commands 1234
- ACCESS-LIST ICMP 1236
- ACCESS-LIST IP 1239
- ACCESS-LIST PROTO 1243
- ACCESS-LIST TCP 1248
- ACCESS-LIST UDP 1252
- MAC ACCESS-GROUP 1256
- NO ACCESS-LIST 1257
- NO ACCESS-GROUP 1258
- NO MAC ACCESS-GROUP 1259
- SHOW ACCESS-LIST 1260
- SHOW INTERFACE ACCESS-GROUP 1262
- Chapter 75 1263
- MLS QOS ENABLE 1265
- MLS QOS MAP COS-QUEUE 1266
- MLS QOS MAP DSCP-QUEUE 1268
- MLS QOS QUEUE 1270
- MLS QOS SET COS 1271
- MLS QOS SET DSCP 1272
- MLS QOS TRUST COS 1273
- MLS QOS TRUST DSCP 1274
- NO MLS QOS ENABLE 1275
- NO WRR-QUEUE WEIGHT 1276
- SHOW MLS QOS INTERFACE 1277
- (continued) 1278
- SHOW MLS QOS MAPS COS-QUEUE 1280
- SHOW MLS QOS MAPS DSCP-QUEUE 1281
- WRR-QUEUE WEIGHT 1283
- Management Security 1285
- Local Manager Accounts 1287
- Password 1289
- Encryption 1289
- Configuration 1297
- Chapter 77 1299
- ENABLE PASSWORD 1300
- NO ENABLE PASSWORD 1302
- NO USERNAME 1304
- SERVICE PASSWORD-ENCRYPTION 1305
- USERNAME 1306
- Telnet Server 1309
- Enabling the Telnet Server 1311
- Disabling the Telnet Server 1312
- Displaying the Telnet Server 1313
- Chapter 78: Telnet Server 1314
- Telnet Server Commands 1315
- NO SERVICE TELNET 1316
- SERVICE TELNET 1317
- SHOW TELNET 1318
- Telnet Client 1319
- Chapter 80: Telnet Client 1322
- Telnet Client Commands 1323
- TELNET IPV6 1325
- Secure Shell (SSH) Server 1327
- Support for SSH 1329
- SSH and Enhanced Stacking 1331
- Enabling the SSH Server 1334
- Disabling the SSH Server 1335
- Deleting Encryption Keys 1336
- Displaying the SSH Server 1337
- SSH Server Commands 1339
- CRYPTO KEY DESTROY HOSTKEY 1340
- CRYPTO KEY GENERATE HOSTKEY 1342
- NO SERVICE SSH 1344
- SERVICE SSH 1345
- SHOW CRYPTO KEY HOSTKEY 1346
- SHOW SSH SERVER 1347
- Chapter 84 1349
- HTTP server enabled. Port 80 1354
- SERVICE HTTP 1356
- IP HTTP PORT 1357
- NO SERVICE HTTP 1358
- SHOW IP HTTP 1359
- Chapter 86 1361
- Distinguished 1363
- generate 1365
- CRYPTO CERTIFICATE DESTROY 1376
- CRYPTO CERTIFICATE GENERATE 1377
- CRYPTO CERTIFICATE IMPORT 1380
- CRYPTO CERTIFICATE REQUEST 1381
- SERVICE HTTPS 1383
- IP HTTPS CERTIFICATE 1384
- NO SERVICE HTTPS 1385
- SHOW CRYPTO CERTIFICATE 1386
- SHOW IP HTTPS 1387
- RADIUS and TACACS+ Clients 1389
- Remote Manager Accounts 1391
- Managing the RADIUS Client 1394
- Specifying a 1395
- RADIUS Global 1395
- Encryption Key 1395
- Specifying the 1395
- Server Timeout 1395
- Deleting Server 1397
- IP Addresses 1397
- Displaying the 1397
- RADIUS Client 1397
- Managing the TACACS+ Client 1398
- RADIUS and TACACS+ Client 1405
- AAA ACCOUNTING LOGIN 1407
- tacacs [ 1409
- AAA AUTHENTICATION LOGIN 1411
- IP RADIUS SOURCE-INTERFACE 1413
- LOGIN AUTHENTICATION 1415
- NO LOGIN AUTHENTICATION 1417
- NO RADIUS-SERVER HOST 1418
- NO TACACS-SERVER HOST 1419
- RADIUS-SERVER HOST 1420
- RADIUS-SERVER KEY 1422
- RADIUS-SERVER TIMEOUT 1423
- SHOW RADIUS 1424
- SHOW TACACS 1426
- TACACS-SERVER HOST 1428
- TACACS-SERVER KEY 1429
- TACACS-SERVER TIMEOUT 1430
- System Monitoring Commands 1431
- SHOW CPU 1432
- SHOW CPU HISTORY 1433
- SHOW CPU USER-THREADS 1434
- SHOW MEMORY 1435
- SHOW MEMORY ALLOCATION 1436
- SHOW MEMORY HISTORY 1437
- SHOW MEMORY POOLS 1438
- SHOW PROCESS 1439
- SHOW SYSTEM SERIALNUMBER 1440
- SHOW SYSTEM INTERRUPTS 1441
- SHOW TECH-SUPPORT 1442
- Appendix B 1445
- Boot Configuration File 1446
- Class of Service 1447
- Console Port 1448
- Status Disabled 1450
- Port 1813 1450
- Enhanced Stacking 1451
- IGMP Snooping 1453
- MAC Address Table 1456
- Management IP Address 1457
- Manager Account 1458
- Port Settings 1459
- Secure Shell Server 1463
- SNMP Status Disabled 1465
- Simple Network Time Protocol 1466
- Multiple 1468
- Spanning Tree 1468
- Protocol 1468
- System Name 1469
- TACACS+ Client 1470
- Web Server 1473
- Command Index 1475
Manuais e produtos relacionados com Hardware de computador Allied-telesis AT-9000 Series
(404 páginas)
(46 páginas)© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.081 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais