Allied-telesis AT-FS970M Series Manual do Utilizador descarregar pdf (Página 299)

AT-FS970M Series Version 2.3.1.0 Web Interface User’s Guide

299

The LLDP Coordinate Location page is displayed. See Figure 133.

Figure 133. LLDP Coordinate Location Page— Add

6. Specify the following fields as needed:

 ID— Enter an LLDP Coordinate Location ID. The range is 1 to 256.

(This range is separate from the ranges for civic and ELIN entries.)

 Latitude— Enter a latitude value in decimal degrees. The range is

-90.0º to 90.0º. The field accepts up to two digits to the right of the

decimal point.

 Latitude Resolution— Enter latitude resolution as the number of

valid bits. The range is 0 to 34.

 Longitude— Enter a longitude value in decimal degrees. The

range is -180.0º to 180.0º. The field accepts up to two digits to the

right of the decimal point.

 Longitude Resolution— Enter longitude resolution as the number

of valid bits. The range is 0 to 34.

 Altitude— Enter an altitude in meters or floors. For the altitude in

meters, the range is -2097151.0 to 2097151.0 meters. The

parameter accepts up to eight digits to the right of the decimal

point. For altitude in the number of floors, the range is -2097151.0

to 2097151.0. Use the Altitude Type field to specify meters or

floors.

1 2 ... 294 295 296 297 298 299 300 301 302 303 304 ... 329 330

Sem comentários

Allied-telesis AT-FS970M Series Manual do Utilizador Página 299