Allied-telesis AT-FS970M Series Manual do Utilizador Página 59
- Página / 193
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
AT-FS970M Switch Command Line User’s Guide
59
Console Line mode awplus (config-line)# Sets the session timer for local
management sessions.
Activates and deactivates remote
manager authentication.
Virtual Terminal Line mode awplus (config-line)#
Sets the session timers for remote
Telnet and SSH management
sessions.
Activates and deactivates remote
manager authentication.
Interface mode awplus (config-if)#
Configures port settings.
Disables and enables ports.
Configures the port mirror.
Configures 802.1x port-based
network access control.
Creates static port trunks.
Sets the load distribution method for
static port trunks.
Adds and removes ports from
VLANs.
Creates Quality of Service policies.
VLAN Configuration mode awplus (config-vlan)#
Creates VLANs.
Civic Location mode awplus (config_civic)#
Creates optional LLDP-MED civic
location entries.
Coordinate Location mode awplus (config_coord)#
Creates optional LLDP-MED
coordinate location entries.
Table 2. AlliedWare Plus Modes (Continued)
Mode Prompt Function
- AT-FS970M Series 1
- Copyright 2
- Contents 10
- Document Conventions 46
- Contacting Allied Telesis 48
- Getting Started 49
- AlliedWare Plus Command Line 51
- Interface 51
- Management Sessions 52
- Remote Telnet Management 53
- Web Browser Windows 53
- Management Interfaces 55
- Local Manager Account 56
- AlliedWare Plus Command Modes 57
- Moving Down the Hierarchy 60
- Moving Up the Hierarchy 65
- DISABLE command 66
- Port Numbers in Commands 67
- Command Format 69
- Startup Messages 70
- Starting a Management Session 73
- What to Configure First 78
- Changing the 79
- Login Password 79
- Assigning a Name 79
- Adding a 80
- Management IP 80
- Saving Your 82
- Ending a Management Session 83
- Basic Command Line Management 85
- Clearing the Screen 86
- Displaying the On-line Help 87
- ? (Question Mark Key) 93
- CLEAR SCREEN 95
- CONFIGURE TERMINAL 96
- Examples 100
- Parameters 101
- Description 101
- Chapter 5 109
- Controlling Eco-Mode LED 112
- Temperature and Fan Control 113
- ECOFRIENDLY LED 114
- NO ECOFRIENDLY LED 115
- SHOW ECOFRIENDLY 116
- SHOW SYSTEM ENVIRONMENT 117
- Parameter Description 118
- Basic Operations 119
- Basic Switch Management 121
- Adding a Name to the Switch 122
- Contact: JordanB 123
- Displaying Parameter Settings 124
- Pinging Network Devices 126
- Resetting the Switch 127
- filename2 129
- “SHOW BAUD-RATE” on page 164 131
- Configuring the Banners 135
- Chapter 8 139
- BANNER EXEC 141
- BANNER LOGIN 143
- BANNER MOTD 145
- BAUD-RATE SET 147
- CLOCK SET 148
- ERASE STARTUP-CONFIG 149
- EXEC-TIMEOUT 150
- HOSTNAME 153
- LINE CONSOLE 154
- LINE VTY 155
- NO HOSTNAME 156
- PING IPv6 159
- SERVICE MAXMANAGER 162
- SHOW BANNER LOGIN 163
- SHOW BAUD-RATE 164
- SHOW CLOCK 165
- SHOW RUNNING-CONFIG 166
- SHOW SWITCH 167
- SHOW SYSTEM 169
- SHOW SYSTEM SERIALNUMBER 170
- SHOW USERS 171
- SHOW VERSION 173
- SNMP-SERVER CONTACT 174
- SNMP-SERVER LOCATION 175
- SYSTEM TERRITORY 176
- Port Parameters 179
- Adding Descriptions 180
- Chapter 9: Port Parameters 182
- Enabling or Disabling Ports 184
- Resetting Ports 189
- Displaying Port 196
- Displaying SFP Information 198
- Port Parameter Commands 199
- Command Mode Description 201
- BACKPRESSURE 202
- CLEAR PORT COUNTER 205
- DESCRIPTION 206
- EGRESS-RATE-LIMIT 210
- FCTRLLIMIT 211
- FLOWCONTROL 212
- HOLBPLIMIT 215
- NO EGRESS-RATE-LIMIT 217
- NO FLOWCONTROL 218
- NO SHUTDOWN 219
- NO STORM-CONTROL 221
- POLARITY 222
- RENEGOTIATE 225
- SHOW FLOWCONTROL INTERFACE 227
- SHOW INTERFACE 229
- Interface Port number 230
- SHOW INTERFACE BRIEF 233
- SHOW INTERFACE STATUS 235
- SHOW RUNNING-CONFIG INTERFACE 240
- SHOW STORM-CONTROL 241
- SHOW SYSTEM PLUGGABLE 243
- SHOW SYSTEM PLUGGABLE DETAIL 244
- SHUTDOWN 245
- STORM-CONTROL 249
- Power Over Ethernet 251
- Prioritization 253
- Enabling and Disabling PoE 254
- Prioritizing Ports 257
- Managing Legacy PDs 259
- Monitoring Power Consumption 260
- Displaying PoE Information 261
- Power Over Ethernet Commands 263
- NO POWER-INLINE ALLOW-LEGACY 266
- NO POWER-INLINE DESCRIPTION 267
- NO POWER-INLINE ENABLE 268
- NO POWER-INLINE MAX 269
- NO POWER-INLINE PRIORITY 270
- NO SERVICE POWER-INLINE 272
- POWER-INLINE ALLOW-LEGACY 274
- POWER-INLINE DESCRIPTION 275
- POWER-INLINE ENABLE 276
- POWER-INLINE MAX 277
- POWER-INLINE PRIORITY 278
- POWER-INLINE USAGE-THRESHOLD 280
- SERVICE POWER-INLINE 281
- SHOW POWER-INLINE 282
- SHOW POWER-INLINE INTERFACE 287
- Chapter 13 293
- Adding an IPv4 297
- Management 297
- Default Gateway 299
- Deleting an IPv4 300
- Address and 300
- Displaying an 301
- Adding an IPv6 302
- Deleting an IPv6 304
- CLEAR IPV6 NEIGHBORS 309
- 143.87.132.45: 315
- IPV6 ADDRESS 316
- IPV6 ROUTE 318
- 45ab:672:934c::78:17cb: 319
- NO IPV6 ADDRESS 323
- NO IPV6 ROUTE 324
- SHOW IPV6 INTERFACE 329
- SHOW IPV6 ROUTE 330
- Chapter 15 331
- SNTP Server 333
- Disabling the SNTP Client 336
- Displaying the SNTP Client 337
- Displaying the Date and Time 338
- SNTP Client Commands 339
- CLOCK SUMMER-TIME 340
- CLOCK TIMEZONE 341
- NO CLOCK SUMMER-TIME 342
- NO NTP PEER 343
- NTP PEER 344
- PURGE NTP 345
- SHOW NTP ASSOCIATIONS 347
- SHOW NTP STATUS 349
- Domain Name System (DNS) 351
- IP NAME-SERVER 360
- IP DOMAIN-NAME 362
- IP DOMAIN-LIST 363
- IP DOMAIN-LOOKUP 365
- SHOW IP NAME-SERVER 366
- SHOW IP DOMAIN-NAME 367
- SHOW HOSTS 368
- Adding Static MAC Addresses 372
- Deleting MAC Addresses 374
- Setting the Aging Timer 376
- Chapter 19: MAC Address Table 378
- MAC Address Table Commands 379
- CLEAR MAC ADDRESS-TABLE 380
- MAC ADDRESS-TABLE AGEING-TIME 382
- MAC ADDRESS-TABLE STATIC 384
- NO MAC ADDRESS-TABLE STATIC 386
- SHOW MAC ADDRESS-TABLE 388
- Chapter 21: Enhanced Stacking 394
- Save the configuration 397
- Configuring a Member Switch 398
- Member Switches 404
- Disabling Enhanced Stacking 413
- Enhanced Stacking Commands 415
- ESTACK COMMAND-SWITCH 417
- ESTACK RUN 418
- NO ESTACK COMMAND-SWITCH 419
- NO ESTACK RUN 420
- RCOMMAND 421
- REBOOT ESTACK MEMBER 422
- SHOW ESTACK 424
- SHOW ESTACK COMMAND-SWITCH 426
- SHOW ESTACK REMOTELIST 427
- UPLOAD CONFIG REMOTELIST 429
- UPLOAD IMAGE REMOTELIST 430
- Link-flap Protection 433
- Configuring the Feature 436
- Link-flap Protection Commands 437
- LINK-FLAP DURATION 438
- LINK-FLAP PROTECTION 439
- LINK-FLAP RATE 440
- NO LINK-FLAP PROTECTION 441
- SHOW LINK-FLAP 442
- Port Mirror 443
- Chapter 25: Port Mirror 446
- Displaying the Port Mirror 449
- Port Mirror Commands 451
- MIRROR INTERFACE 453
- NO MIRROR INTERFACE 455
- SHOW MIRROR 456
- DHCP Relay Overview 459
- Agent Option 82 461
- Client Requests 462
- Message Length 463
- Adding the IP 464
- Addresses of the 464
- DHCP Servers 464
- Adding DHCP 465
- Relay to the 465
- Option 82 467
- DHCP Relay Commands 471
- IP DHCP-RELAY 473
- IP DHCP-RELAY AGENT-OPTION 474
- IP DHCP-RELAY MAXHOPS 479
- IP DHCP-RELAY SERVER-ADDRESS 480
- NO IP DHCP-RELAY 481
- NO IP DHCP-RELAY AGENT-OPTION 482
- 214.154.35.78 484
- NO SERVICE DHCP-RELAY 485
- SERVICE DHCP-RELAY 486
- SHOW IP DHCP-RELAY 487
- Group Link Control 489
- Configuration Examples 499
- Group Link Control Commands 503
- GROUP-LINK-CONTROL 504
- GROUP-LINK-CONTROL DOWNSTREAM 505
- GROUP-LINK-CONTROL UPSTREAM 507
- NO GROUP-LINK-CONTROL 508
- SHOW GROUP-LINK-CONTROL 511
- Multicast Commands 513
- File System 519
- destinationfile 523
- Chapter 32: File System 526
- File System Commands 529
- DELETE FORCE 532
- SHOW FILE SYSTEMS 535
- Boot Configuration Files 537
- Chapter 35 543
- BOOT CONFIG-FILE 544
- COPY RUNNING-CONFIG 546
- NO BOOT CONFIG-FILE 549
- SHOW BOOT 550
- SHOW STARTUP-CONFIG 552
- File Transfer 555
- Downloading 557
- Software with 557
- Files to the 558
- Switch with 558
- Uploading Files 559
- 20100601091645.txt 560
- Waiting to send 563
- Chapter 36: File Transfer 564
- File Transfer Commands 567
- COPY FILENAME ZMODEM 568
- COPY FLASH TFTP 569
- COPY TFTP FLASH 570
- COPY ZMODEM 572
- Snooping 575
- (IGMP) Snooping 577
- Host Node Topology 580
- Enabling IGMP Snooping 581
- Disabling IGMP Snooping 584
- Displaying IGMP Snooping 585
- IGMP Snooping Commands 587
- CLEAR IP IGMP 588
- IP IGMP LIMIT 589
- IP IGMP QUERIER-TIMEOUT 590
- IP IGMP SNOOPING 591
- IP IGMP SNOOPING MROUTER 594
- IP IGMP STATUS 595
- NO IP IGMP SNOOPING 596
- NO IP IGMP SNOOPING MROUTER 597
- SHOW IP IGMP SNOOPING 598
- Assigning 603
- Multiple Queriers 603
- .2 Enabled Enabled Active 604
- .3 Enabled Disabled None 605
- .4 Enabled Enabled Standby 605
- Configuring 608
- Chapter 41 611
- IP IGMP QUERY-INTERVAL 612
- IP IGMP SNOOPING QUERIER 613
- NO IP IGMP SNOOPING QUERIER 614
- SHOW IP IGMP INTERFACE 615
- DHCP Snooping Commands 617
- ARP SECURITY 619
- ARP SECURITY VIOLATION 620
- CLEAR ARP SECURITY STATISTICS 622
- IP DHCP SNOOPING 626
- IP DHCP SNOOPING AGENT-OPTION 627
- IP DHCP SNOOPING BINDING 629
- IP DHCP SNOOPING MAX-BINDINGS 633
- IP DHCP SNOOPING TRUST 637
- IP DHCP VERIFY MAC-ADDRESS 638
- IP DHCP SNOOPING VIOLATION 640
- IP SOURCE BINDING 642
- SERVICE DHCP SNOOPING 644
- SHOW ARP SECURITY 646
- SHOW ARP SECURITY INTERFACE 648
- SHOW ARP SECURITY STATISTICS 650
- SHOW IP DHCP SNOOPING 652
- SHOW IP DHCP SNOOPING BINDING 654
- SHOW IP SOURCE BINDING 658
- Event Messages 661
- Event Log 663
- Displaying the Event Log 665
- Clearing the Event Log 666
- Event Log Commands 667
- CLEAR LOG 669
- CLEAR LOG BUFFERED 670
- CLEAR LOG PERMANENT 671
- LOG BUFFERED 672
- LOG CONSOLE 674
- LOG PERMANENT 676
- NO LOG BUFFERED 677
- OUtputID Type Status Details 678
- NO LOG CONSOLE 679
- NO LOG PERMANENT 680
- SHOW LOG 682
- SHOW LOG CONFIG 685
- SHOW LOG PERMANENT 687
- SHOW LOG PERMANENT TAIL 688
- SHOW LOG REVERSE 689
- SHOW LOG TAIL 690
- Syslog Client 691
- program 693
- Chapter 45: Syslog Client 694
- Syslog Client Commands 699
- LOG HOST 700
- NO LOG HOST 702
- Port Trunks 705
- Static Port Trunks 707
- Source IP Address (Layer 3) 709
- Displaying Static Port Trunks 715
- Static Port Trunk Commands 717
- NO STATIC-CHANNEL-GROUP 718
- PORT-CHANNEL LOAD-BALANCE 719
- SHOW STATIC-CHANNEL-GROUP 721
- STATIC-CHANNEL-GROUP 722
- Chapter 49 725
- Load Distribution 727
- Creating New Aggregators 729
- Adding Ports to Aggregators 731
- Deleting Aggregators 733
- Displaying Aggregators 734
- LACP Commands 737
- CHANNEL-GROUP 738
- LACP SYSTEM-PRIORITY 740
- NO CHANNEL-GROUP 741
- SHOW ETHERCHANNEL 744
- SHOW ETHERCHANNEL DETAIL 745
- Chapter 50: LACP Commands 746
- SHOW ETHERCHANNEL SUMMARY 747
- SHOW LACP SYS-ID 748
- SHOW PORT ETHERCHANNEL 749
- Spanning Tree Protocols 751
- STP, RSTP and MSTP Protocols 753
- Path Costs and Port Costs 756
- Port Priority 757
- Point-to-Point and Edge Ports 760
- Mixed STP and RSTP Networks 762
- Spanning Tree and VLANs 763
- RSTP and MSTP BPDU Guard 764
- STP, RSTP, MSTP Loop Guard 766
- STP and RSTP Root Guard 771
- Spanning Tree Protocol (STP) 773
- Setting the Switch Parameters 776
- Setting the Port Parameters 778
- Displaying STP Settings 780
- STP Commands 781
- Chapter 53: STP Commands 782
- NO SPANNING-TREE STP ENABLE 783
- SHOW SPANNING-TREE 784
- SPANNING-TREE FORWARD-TIME 786
- SPANNING-TREE GUARD ROOT 787
- SPANNING-TREE HELLO-TIME 788
- SPANNING-TREE MAX-AGE 789
- SPANNING-TREE MODE STP 790
- SPANNING-TREE PATH-COST 791
- SPANNING-TREE PORTFAST 792
- SPANNING-TREE STP ENABLE 796
- Setting the 800
- Forward Time 800
- Hello Time, and 800
- Setting the Bridge 801
- Priority 801
- Enabling or 801
- Disabling BPDU 801
- Configuring Port 803
- Displaying RSTP Settings 808
- RSTP Commands 809
- Chapter 55: RSTP Commands 810
- NO SPANNING-TREE PORTFAST 811
- NO SPANNING-TREE LOOP-GUARD 813
- NO SPANNING-TREE RSTP ENABLE 815
- SPANNING-TREE LINK-TYPE 823
- SPANNING-TREE LOOP-GUARD 824
- SPANNING-TREE MODE RSTP 826
- SPANNING-TREE RSTP ENABLE 832
- Chapter 56 833
- MSTI Guidelines 838
- VLAN and MSTI Associations 839
- Ports in Multiple MSTIs 840
- Summary of Guidelines 846
- Associating VLANs to MSTIs 848
- MSTP Root Guard 852
- MSTP Commands 853
- Chapter 57: MSTP Commands 854
- INSTANCE MSTI-ID PRIORITY 855
- INSTANCE MSTI-ID VLAN 857
- NO SPANNING-TREE MSTP ENABLE 860
- SHOW SPANNING-TREE MST CONFIG 862
- SHOW SPANNING-TREE MST 863
- SPANNING-TREE MODE MSTP 868
- SPANNING-TREE MSTP ENABLE 869
- SPANNING-TREE MST INSTANCE 871
- <region-name> 875
- REVISION 876
- Virtual LANs 877
- Port-based and Tagged VLANs 879
- Port-based VLANs 881
- Tagged VLANs 881
- Port-based VLAN Overview 882
- Port VLAN 883
- Identifier 883
- Port-based 885
- Example 1 885
- Example 2 886
- Tagged VLAN Overview 888
- Tagged VLAN 890
- Creating VLANs 893
- Adding Tagged Ports to VLANs 896
- Deleting VLANs 900
- Displaying the VLANs 901
- Port-based and Tagged VLAN 903
- NO SWITCHPORT ACCESS VLAN 904
- NO SWITCHPORT TRUNK 905
- SHOW VLAN 908
- SWITCHPORT ACCESS VLAN 910
- SWITCHPORT MODE ACCESS 912
- SWITCHPORT MODE TRUNK 913
- SWITCHPORT TRUNK ALLOWED VLAN 915
- SWITCHPORT TRUNK NATIVE VLAN 918
- Chapter 60 923
- Figure 172. GVRP Example 925
- GVRP and Network Security 928
- Enabling GVRP on the Switch 930
- Enabling GIP on the Switch 931
- Enabling GVRP on the Ports 932
- Setting the GVRP Timers 933
- Disabling GVRP on the Ports 935
- Disabling GIP on the Switch 936
- Disabling GVRP on the Switch 937
- Displaying GVRP 939
- CONVERT DYNAMIC VLAN 943
- GVRP APPLICANT STATE ACTIVE 944
- GVRP APPLICANT STATE NORMAL 945
- GVRP ENABLE 946
- GVRP REGISTRATION 947
- GVRP TIMER JOIN 948
- GVRP TIMER LEAVE 949
- GVRP TIMER LEAVEALL 950
- NO GVRP ENABLE 951
- NO GVRP TIMER JOIN 952
- NO GVRP TIMER LEAVE 953
- NO GVRP TIMER LEAVEALL 954
- PURGE GVRP 955
- SHOW GVRP APPLICANT 956
- SHOW GVRP CONFIGURATION 957
- SHOW GVRP MACHINE 958
- SHOW GVRP STATISTICS 959
- Receive GARP Messages: Empty 960
- Transmit GARP Messages: Empty 960
- SHOW GVRP TIMER 961
- MAC Address-based VLANs 963
- VLANs that Span 967
- Switches 967
- General Steps 970
- Removing MAC Addresses 973
- Displaying VLANs 975
- Chapter 63 979
- macaddress 981
- SHOW VLAN MACADDRESS 984
- VLAN MACADDRESS 986
- Sales and the VID 3: 987
- Private Port VLANs 993
- Private VLAN 995
- Functionality 995
- Creating Private VLANs 997
- Adding Host and Uplink Ports 998
- Displaying Private VLANs 1000
- Private Port VLAN Commands 1001
- PRIVATE-VLAN 1003
- SHOW VLAN PRIVATE-VLAN 1004
- Voice VLAN Commands 1007
- NO SWITCHPORT VOICE VLAN 1008
- SWITCHPORT VOICE DSCP 1009
- SWITCHPORT VOICE VLAN 1010
- Confirmation Command 1011
- Port Security 1013
- Chapter 67 1015
- Overview 1016
- Configuring Ports 1018
- Displaying Port Settings 1022
- INTERFACE Command 1023
- Commands 1025
- NO SWITCHPORT PORT-SECURITY 1026
- SHOW PORT-SECURITY INTERFACE 1028
- Parameter 1031
- SWITCHPORT PORT-SECURITY 1033
- Chapter 69 1039
- Authentication Process 1041
- Port Roles 1042
- Single-host mode 1046
- Multi-host mode 1046
- Multi-supplicant mode 1046
- Multi-Supplicant 1048
- Supplicant VLAN 1052
- Attributes on the 1052
- RADIUS Server 1052
- Guest VLAN 1053
- Guidelines 1054
- Configuring the 1058
- Operating Modes 1058
- Configuring Reauthentication 1060
- Configuring Supplicant Ports 1062
- Removing Ports 1064
- Supplicant Role 1064
- Control Commands 1069
- AUTH DYNAMIC-VLAN-CREATION 1074
- AUTH GUEST-VLAN 1076
- AUTH HOST-MODE 1077
- AUTH REAUTHENTICATION 1079
- AUTH TIMEOUT QUIET-PERIOD 1080
- AUTH TIMEOUT REAUTH-PERIOD 1081
- AUTH TIMEOUT SERVER-TIMEOUT 1082
- AUTH TIMEOUT SUPP-TIMEOUT 1083
- AUTH-MAC ENABLE 1084
- AUTH-MAC REAUTH-RELEARNING 1085
- DOT1X CONTROL-DIRECTION 1086
- DOT1X EAP 1088
- DOT1X INITIALIZE INTERFACE 1090
- DOT1X MAX-REAUTH-REQ 1091
- DOT1X PORT-CONTROL AUTO 1092
- DOT1X PORT-CONTROL SUPPLICANT 1095
- DOT1X TIMEOUT TX-PERIOD 1101
- NO AUTH DYNAMIC-VLAN-CREATION 1103
- NO AUTH GUEST-VLAN 1104
- NO AUTH REAUTHENTICATION 1105
- NO AUTH-MAC ENABLE 1106
- NO DOT1X PORT-CONTROL 1107
- SHOW AUTH-MAC INTERFACE 1109
- SHOW DOT1X 1113
- SHOW DOT1X INTERFACE 1114
- Section X 1119
- SNMPv1 and SNMPv2c 1121
- Enabling SNMPv1 and SNMPv2c 1124
- Creating Community Strings 1125
- Deleting Community Strings 1128
- Disabling SNMPv1 and SNMPv2c 1129
- Displaying SNMPv1 and SNMPv2c 1130
- Exec mode: 1131
- SNMPv1 and SNMPv2c Commands 1133
- NO SNMP-SERVER 1135
- NO SNMP-SERVER COMMUNITY 1136
- NO SNMP-SERVER ENABLE TRAP 1137
- Global Configuration mode 1138
- NO SNMP-SERVER HOST 1139
- NO SNMP-SERVER VIEW 1141
- NO SNMP TRAP LINK-STATUS 1142
- SHOW RUNNING-CONFIG SNMP 1143
- SHOW SNMP-SERVER 1144
- SHOW SNMP-SERVER COMMUNITY 1145
- SHOW SNMP-SERVER VIEW 1147
- SNMP-SERVER 1148
- SNMP-SERVER COMMUNITY 1149
- SNMP-SERVER ENABLE TRAP 1150
- SNMP-SERVER ENABLE TRAP AUTH 1151
- SNMP-SERVER HOST 1152
- SNMP-SERVER VIEW 1154
- SNMP TRAP LINK-STATUS 1156
- SNMPv3 Commands 1157
- Chapter 73: SNMPv3 Commands 1158
- NO SNMP-SERVER ENGINEID LOCAL 1160
- NO SNMP-SERVER GROUP 1161
- NO SNMP-SERVER USER 1164
- SHOW SNMP-SERVER GROUP 1167
- SHOW SNMP-SERVER HOST 1168
- SHOW SNMP-SERVER USER 1169
- SNMP-SERVER ENGINEID LOCAL 1172
- SNMP-SERVER GROUP 1173
- SNMP-SERVER USER 1177
- Network Management 1181
- Chapter 74 1183
- Configuring the sFlow Agent 1186
- Configuring the Ports 1187
- Polling Interval 1188
- Enabling the sFlow Agent 1189
- Disabling the sFlow Agent 1190
- Displaying the sFlow Agent 1191
- Configuration Example 1192
- Chapter 74: sFlow Agent 1194
- Chapter 75 1195
- NO SFLOW COLLECTOR IP 1196
- NO SFLOW ENABLE 1197
- SFLOW COLLECTOR IP 1198
- SFLOW ENABLE 1199
- SFLOW POLLING-INTERVAL 1200
- SFLOW SAMPLING-RATE 1202
- SHOW SFLOW 1204
- LLDP and LLDP-MED 1207
- Mandatory 1209
- LLDP TLVs 1209
- Optional LLDP 1209
- MED TLVs 1211
- Chapter 76: LLDP and LLDP-MED 1214
- port-description 1216
- link-aggregation 1216
- mac-phy-config 1216
- Capabilities 1218
- Network-policy 1218
- Use the SHOW LLDP 1219
- INTERFACE command to confirm 1219
- Removing LLDP TLVs from Ports 1229
- Displaying Port TLVs 1237
- LLDP and LLDP-MED Commands 1239
- CLEAR LLDP STATISTICS 1242
- CLEAR LLDP TABLE 1243
- LLDP HOLDTIME-MULTIPLIER 1244
- LLDP LOCATION 1245
- LLDP MANAGEMENT-ADDRESS 1247
- LLDP MED-NOTIFICATIONS 1249
- LLDP MED-TLV-SELECT 1250
- LLDP NOTIFICATIONS 1253
- LLDP NOTIFICATION-INTERVAL 1254
- LLDP REINIT 1255
- LLDP RUN 1256
- LLDP TIMER 1257
- LLDP TLV-SELECT 1258
- LLDP TRANSMIT RECEIVE 1261
- LLDP TX-DELAY 1262
- LOCATION CIVIC-LOCATION 1263
- LOCATION COORD-LOCATION 1266
- LOCATION ELIN-LOCATION 1269
- NO LLDP MED-NOTIFICATIONS 1270
- NO LLDP MED-TLV-SELECT 1271
- NO LLDP NOTIFICATIONS 1273
- NO LLDP RUN 1274
- NO LLDP TLV-SELECT 1275
- NO LLDP TRANSMIT RECEIVE 1276
- NO LOCATION 1277
- SHOW LLDP 1279
- SHOW LLDP INTERFACE 1281
- SHOW LLDP NEIGHBORS DETAIL 1285
- Voice VLAN ID 1288
- SHOW LLDP NEIGHBORS INTERFACE 1290
- SHOW LLDP STATISTICS 1292
- SHOW LOCATION 1296
- Chapter 78 1299
- Adding Static ARP Entries 1301
- Displaying the ARP Table 1303
- CLEAR ARP-CACHE 1308
- NO ARP (IP ADDRESS) 1309
- SHOW ARP 1310
- Chapter 80 1313
- RMON Port Statistics 1315
- Viewing Statistics 1316
- Deleting Statistics 1316
- RMON Histories 1317
- Displaying 1318
- History Groups 1318
- Deleting History 1319
- RMON Alarms 1320
- Creating RMON 1321
- Statistics Groups 1321
- Creating an 1323
- Alarm - Example 1323
- Enter_log_message 1324
- Chapter 80: RMON 1326
- Phase 3: Creating the Event 1327
- Phase 4: Creating the Alarm 1327
- Use the SHOW RMON ALARM 1328
- RMON Commands 1329
- Chapter 81: RMON Commands 1330
- NO RMON ALARM 1331
- NO RMON COLLECTION HISTORY 1332
- NO RMON COLLECTION STATS 1333
- NO RMON EVENT 1334
- RMON ALARM 1335
- RMON COLLECTION HISTORY 1338
- RMON COLLECTION STATS 1340
- RMON EVENT LOG 1341
- RMON EVENT LOG TRAP 1342
- RMON EVENT TRAP 1344
- SHOW RMON ALARM 1346
- SHOW RMON EVENT 1348
- SHOW RMON HISTORY 1350
- SHOW RMON STATISTICS 1352
- Management Security 1353
- Local Manager Accounts 1355
- Password 1357
- Encryption 1357
- Configuration 1365
- Chapter 83 1367
- ENABLE PASSWORD 1368
- NO ENABLE PASSWORD 1370
- NO USERNAME 1372
- SERVICE PASSWORD-ENCRYPTION 1373
- USERNAME 1374
- Telnet Server 1377
- Enabling the Telnet Server 1379
- Disabling the Telnet Server 1380
- Displaying the Telnet Server 1381
- Chapter 84: Telnet Server 1382
- Telnet Server Commands 1383
- NO SERVICE TELNET 1384
- SERVICE TELNET 1385
- SHOW TELNET 1386
- Telnet Client 1387
- Chapter 86: Telnet Client 1390
- Telnet Client Commands 1391
- TELNET IPV6 1393
- Secure Shell (SSH) Server 1395
- Support for SSH 1397
- SSH and Enhanced Stacking 1399
- Enabling the SSH Server 1402
- Disabling the SSH Server 1403
- Deleting Encryption Keys 1404
- Displaying the SSH Server 1405
- SSH Server Commands 1407
- CRYPTO KEY DESTROY HOSTKEY 1408
- CRYPTO KEY GENERATE HOSTKEY 1410
- NO SERVICE SSH 1412
- SERVICE SSH 1413
- SHOW CRYPTO KEY HOSTKEY 1414
- SHOW SSH SERVER 1415
- Chapter 90 1417
- HTTP server enabled. Port 80 1422
- SERVICE HTTP 1424
- IP HTTP PORT 1425
- NO SERVICE HTTP 1426
- SHOW IP HTTP 1427
- Chapter 92 1429
- Distinguished 1431
- generate 1433
- CRYPTO CERTIFICATE DESTROY 1444
- CRYPTO CERTIFICATE GENERATE 1445
- CRYPTO CERTIFICATE IMPORT 1448
- CRYPTO CERTIFICATE REQUEST 1449
- SERVICE HTTPS 1451
- IP HTTPS CERTIFICATE 1452
- NO SERVICE HTTPS 1453
- SHOW CRYPTO CERTIFICATE 1454
- SHOW IP HTTPS 1455
- RADIUS and TACACS+ Clients 1457
- Remote Manager Accounts 1459
- Managing the RADIUS Client 1462
- Specifying a 1463
- RADIUS Global 1463
- Encryption Key 1463
- Specifying the 1463
- Server Timeout 1463
- Deleting Server 1465
- IP Addresses 1465
- Displaying the 1465
- RADIUS Client 1465
- Managing the TACACS+ Client 1466
- RADIUS and TACACS+ Client 1473
- AAA ACCOUNTING LOGIN 1475
- Confirmation Commands 1476
- tacacs [ 1477
- AAA AUTHENTICATION LOGIN 1479
- IP RADIUS SOURCE-INTERFACE 1481
- LOGIN AUTHENTICATION 1483
- NO LOGIN AUTHENTICATION 1485
- NO RADIUS-SERVER HOST 1486
- NO TACACS-SERVER HOST 1487
- RADIUS-SERVER HOST 1488
- RADIUS-SERVER KEY 1490
- RADIUS-SERVER TIMEOUT 1491
- SHOW RADIUS 1492
- SHOW TACACS 1494
- TACACS-SERVER HOST 1496
- TACACS-SERVER KEY 1497
- TACACS-SERVER TIMEOUT 1498
- Quality of Service 1499
- Chapter 96 1501
- Creating ACLs 1505
- Creating 1517
- Numbered MAC 1517
- Creating Named 1519
- IPv4 Address 1519
- IPv6 Address 1521
- Assigning ACLs to Ports 1523
- Assigning MAC 1524
- Address ACLs to 1524
- Assigning Named 1525
- IPv4 ACLs 1525
- IPv6 ACLs 1526
- Removing ACLs from Ports 1527
- Removing Named 1528
- Deleting ACLs from the Switch 1530
- Setting ACL Time Ranges 1533
- Displaying the ACLs 1535
- ACL Commands 1539
- Chapter 97: ACL Commands 1540
- ABSOLUTE START 1542
- ACCESS-CLASS 1544
- ACCESS-GROUP 1546
- ACCESS-LIST (MAC Address) 1548
- ACCESS-LIST ICMP 1551
- ACCESS-LIST IP 1554
- ACCESS-LIST PROTO 1558
- ACCESS-LIST TCP 1563
- ACCESS-LIST UDP 1567
- IP ACCESS-LIST 1571
- IP ACCESS-LIST (ICMP) 1572
- IP ACCESS-LIST (IP) 1575
- IP ACCESS-LIST (MAC) 1578
- IP ACCESS-LIST (PROTO) 1581
- IP ACCESS-LIST (TCP) 1584
- IP ACCESS-LIST (UDP) 1588
- IPV6 ACCESS-LIST 1592
- IPV6 ACCESS-LIST (ICMP) 1593
- IPV6 ACCESS-LIST (IP) 1596
- IPV6 ACCESS-LIST (PROTO) 1599
- IPV6 ACCESS-LIST (TCP) 1602
- IPV6 ACCESS-LIST (UDP) 1606
- IPV6 TRAFFIC-FILTER 1610
- MAC ACCESS-GROUP 1611
- NO ACCESS-LIST 1612
- NO ACCESS-GROUP 1613
- NO MAC ACCESS-GROUP 1614
- PERIODIC 1615
- PERIODIC (DAILY) 1617
- 5 pm Friday evening: 1618
- 6 pm Sunday evening: 1618
- SHOW ACCESS-LIST 1619
- SHOW INTERFACE ACCESS-GROUP 1621
- SHOW IPV6 ACCESS-LIST 1622
- SHOW TIME-RANGE 1623
- TIME-RANGE 1624
- Quality of Service (QoS) 1625
- Peak Information Rate (PIR) 1627
- Peak Burst Size (PBS) 1627
- Enabling QoS on the Switch 1628
- Creating a Class Map 1629
- Filtering 1630
- Procedures 1630
- Adding a VLAN to a Class Map 1635
- Creating a Policy Map 1636
- Deny unspecified traffic 1638
- Prioritizing CoS and DSCP 1639
- Creating a Twin-rate Policer 1642
- Creating an Aggregate Policer 1644
- Command Description 1646
- Configuring the Egress Queues 1647
- Determining the 1648
- Egress Queues 1648
- Egress Queue 1652
- <0-15> 1653
- Auto-QoS Macro 1656
- Auto-QoS Functionality 1659
- Auto-QoS-MED 1661
- Macro Examples 1661
- Support 1663
- Displaying QoS Settings 1668
- Displaying QoS 1669
- Displaying a 1669
- Class Map 1669
- Displaying CoS to 1671
- Queue Mappings 1671
- Displaying DSCP 1672
- Mappings 1672
- <0-63> 1674
- Chapter 99 1675
- AUTO-QOS 1679
- AUTO-QOS-MED 1681
- CLASS-MAP 1685
- DEFAULT-ACTION 1686
- DESCRIPTION (Policy Map) 1688
- MATCH ACCESS-GROUP 1690
- MATCH COS 1693
- MATCH DSCP 1695
- MATCH IP-PRECEDENCE 1696
- MATCH MAC-TYPE 1697
- MATCH PROTOCOL 1699
- ARP to it: 1703
- MATCH TCP-FLAGS 1704
- MATCH VLAN 1706
- MLS QOS COS 1713
- MLS QOS ENABLE 1715
- MLS QOS MAP COS-QUEUE 1716
- MLS QOS MAP DSCP-QUEUE 1718
- MLS QOS MAP POLICED-DSCP 1720
- <VLANID> 1722
- NO MATCH ACCESS-GROUP 1724
- NO MATCH PROTOCOL 1726
- NO MLS QOS AGGREGATE-POLICE 1728
- NO MLS QOS ENABLE 1729
- NO POLICE AGGREGATE 1730
- POLICE AGGREGATE 1731
- POLICE SINGLE-RATE ACTION 1733
- POLICE TWIN-RATE ACTION 1735
- minimum burst size 1736
- maximum rate 1736
- maximum burst size 1736
- POLICY-MAP 1737
- <0-7> 1738
- SET DSCP 1740
- SET QUEUE 1741
- SERVICE-POLICY INPUT 1743
- SHOW CLASS-MAP 1744
- SHOW POLICY-MAP 1745
- SHOW MLS QOS 1747
- SHOW MLS QOS INTERFACE 1750
- (continued) 1751
- SHOW MLS QOS MAPS COS-QUEUE 1753
- SHOW MLS QOS MAPS DSCP-QUEUE 1754
- MAP DSCP-QUEUE” on page 1718 1755
- TRUST DSCP 1758
- [0 1760
- WRR-QUEUE WEIGHT 1762
- QoS Storm Control Protection 1765
- <1 - 86400> 1767
- <1 - 10000000> 1767
- <100 - 6000> 1768
- Enabling Policy-Based QSP 1769
- Disabling a 1770
- Shutting Down a 1772
- Displaying Port Storm Status 1775
- QSP Commands 1777
- STORM-ACTION 1780
- “cmap2:” 1781
- STORM-DOWNTIME 1782
- STORM-PROTECTION 1783
- STORM-RATE 1784
- STORM-WINDOW 1786
- “cmap5:' 1787
- Chapter 101: QSP Commands 1788
- Section XIV 1789
- Chapter 102 1791
- Routing Interfaces 1793
- Static Routes 1794
- Default Route 1797
- Routing Table 1798
- 1024 static entries 1799
- 1024 dynamic entries 1799
- Creating the 1803
- Interfaces 1804
- Adding Static and 1806
- Default Routes 1806
- IPv4 Routing Commands 1811
- IP ADDRESS 1813
- IP ADDRESS DHCP 1815
- IP ROUTE 1816
- NO IP ADDRESS 1819
- NO IP ADDRESS DHCP 1821
- NO IP ROUTE 1823
- SHOW IP INTERFACE 1825
- SHOW IP ROUTE 1827
- Chapter 104 1829
- Enabling RIP 1831
- Specifying a RIP Version 1833
- Enabling Authentication 1834
- S1> enable 1836
- S1# configure terminal 1836
- S1(config)# router rip 1836
- S1(config-if)# auto-summary 1837
- Advertising the Default Route 1839
- RIP command 1840
- Adjusting Timers 1841
- AUTO-SUMMARY 1846
- DEFAULT-INFORMATION ORIGINATE 1847
- IP RIP AUTHENTICATION STRING 1848
- IP RIP AUTHENTICATION MODE 1849
- IP RIP RECEIVE-PACKET 1850
- IP RIP RECEIVE VERSION 1851
- IP RIP SEND-PACKET 1853
- IP RIP SEND VERSION 1854
- IP RIP SPLIT-HORIZON 1855
- NO AUTO-SUMMARY 1859
- NO IP RIP AUTHENTICATION MODE 1861
- NO IP RIP RECEIVE-PACKET 1863
- NO IP RIP RECEIVE VERSION 1864
- NO IP RIP SEND-PACKET 1865
- NO IP RIP SEND VERSION 1866
- NO IP RIP SPLIT-HORIZON 1867
- NO NETWORK 1868
- NO PASSIVE-INTERFACE 1869
- NO ROUTER RIP 1870
- NO TIMERS BASIC 1871
- NO VERSION 1872
- PASSIVE-INTERFACE 1873
- ROUTER RIP 1874
- SHOW IP RIP 1875
- SHOW IP RIP COUNTER 1877
- SHOW IP RIP INTERFACE 1879
- TIMERS BASIC 1881
- System Monitoring Commands 1885
- SHOW CPU 1886
- SHOW CPU HISTORY 1887
- SHOW CPU USER-THREADS 1888
- SHOW MEMORY 1889
- SHOW MEMORY ALLOCATION 1890
- SHOW MEMORY HISTORY 1891
- SHOW MEMORY POOLS 1892
- SHOW PROCESS 1893
- SHOW SYSTEM INTERRUPTS 1895
- SHOW TECH-SUPPORT 1896
- Appendix B 1899
- “Web Server” on page 1930 1900
- Boot Configuration File 1901
- Class of Service 1902
- Console Port 1903
- DHCP Relay 1904
- Enhanced Stacking 1907
- IGMP Snooping 1909
- IGMP Snooping Querier 1910
- MAC Address Table 1913
- Management IP Address 1914
- Manager Account 1915
- Port Settings 1916
- Secure Shell Server 1920
- SNMP Status Disabled 1922
- Simple Network Time Protocol 1923
- Multiple 1925
- Spanning Tree 1925
- Protocol 1925
- System Name 1926
- TACACS+ Client 1927
- Web Server 1930
- Command Index 1931
Manuais e produtos relacionados com Hardware de computador Allied-telesis AT-FS970M Series
Hardware de computador Allied-telesis AT-S95 CLI (AT-8000GS Series) Manual do Utilizador
(397 páginas)
(397 páginas)
Hardware de computador Allied-telesis AT-S94 CLI (AT-8000S Series) Manual do Utilizador
(402 páginas)
(402 páginas)
© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.061 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais