Allied-telesis AT-S41 Manual do Utilizador Página 129

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 236
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 128
AT-S41 User’s Guide
129
6. Enter a traffic class.
The following prompt is displayed, where X equals the traffic class
specified in the last step.
Enter queue for traffic class X>
Queue is in range of 0 to 1
7. Enter a priority queue (0 - 1).
Note
The default setting for traffic classes 0 - 3 is the low priority queue.
The default setting for traffic classes 4 - 7 is the high priority queue.
All tagged frames will be directed to either the low or high priority
queue as specified.
Note
The tagged information in a frame is not changed as the frame
traverses the switch. A tagged frame leaves a switch with the same
priority level that it had when it entered the switch.
The priority level of tagged frames is determined by the priority
level specified in the frame itself.
8. Repeat this procedure to configure priority levels for other traffic
classes on the switch.
Vista de página 128
1 2 ... 124 125 126 127 128 129 130 131 132 133 134 ... 235 236

Comentários a estes Manuais

Sem comentários