Allied-telesis AT-S60 Manual do Utilizador descarregar pdf (Página 135)

AT-S60 Command Line User’s Guide

133

The following command downloads a new AT-S60 image to the switch

using TFTP. Since this is a TFTP download, you can perform this

command from either a local or Telnet management session. The

command specifies the IP address of the TFTP server and the location of

the image file on the server.

load method=tftp destfile=ats60.img

server=149.166.22.12 file=c:\software\ats60.img

The following command downloads the AT-S60 image file on the master

switch to switches 1 and 4 in an enhanced stack. (Switch numbers are

displayed using the SHOW REMOTELIST command.)

load method=remoteswitch destfile=ats60.img

switchlist=1,4

You can use the REMOTESWITCH option from either a local or a Telnet

management session. However, the switch on which you are executing

the command must be a master switch of the enhanced stack.

The following command downloads the AT-S60 configuration file on the

master switch to switch 2 in an enhanced stack. The VERBOSE option is

included to display download status messages.

load method=remoteswitch destfile=ats60.cfg

switchlist=2 verbose=yes

1 2 ... 130 131 132 133 134 135 136 137 138 139 140 ... 302 303

Sem comentários

Allied-telesis AT-S60 Manual do Utilizador Página 135