Allied-telesis AT-S60 Manual do Utilizador descarregar pdf (Página 282)

Chapter 26: 802.1x Port-Based Access Control Commands

280

SET PORTACCESS PORT ROLE

Syntax

set portaccess port=port|all

role=none|authenticator|supplicant

Parameters

port Specifies the port, or ports, whose role you want to

set. To set all ports, specify ALL.

role Specifies the role of the port. Options are:

Authenticator Sets the port to the Authenticator

role. This activates port-based access

control on the port. This is the correct

setting for a switch port that is

connected to a supplicant node.

Supplicant Sets the port to the Supplicant role.

This role requires the port to login to

whatever device, typically another

switch, the port is connected to.

None Disables port-based access control on

the port. A device connected to a port

in the None role will not have to login.

This is the default setting.

Description

This command sets a port’s role for port-based access control. You must

configure a port role before you configure supplicant or authenticator

commands.

Examples

This command sets Port 2 on the line card in Slot 4 to Authenticator:

set portaccess port=2.4 role=authenticator

This command sets Ports 5 and 6 on the line card in Slot 8 to None:

set portaccess port=8.5-6 role=none

1 2 ... 277 278 279 280 281 282 283 284 285 286 287 ... 302 303

Sem comentários

Allied-telesis AT-S60 Manual do Utilizador Página 282