Chapter 26: 802.1x Port-Based Access Control Commands
282
password Specifies the password for the port. The port sends
the password to the authentication server for
verification when the port logs on to the network.
The password can contain alphanumeric
characters (A to Z, a to z, and 1 to 9). Do not use
spaces or special characters, such as asterisks or
exclamation points. The password is case-sensitive.
Description
This command configures the settings for ports in the Supplicant role.
Example
The following command sets the name to “switch22” and the password
to “bluebird” for Port 8 on the line card in Slot 4:
set portaccess port=4.8 supplicant name=switch22
password=bluebird
Comentários a estes Manuais